UC知道电脑开机启动出了问题怎么办,求高手帮助！
来源：百度知道 编辑：UC知道 时间：2024/05/14 01:29:48
昨天晚上还是好好的，今天早上一开机电脑就显示
Phoenix – AwardBIOS V6.00PG,An Energy Star Ally
Copyright (C) 1984-2003 , Phoenix Technologies,LTD
Intel 845PE-06
Primary Master : None
Primary Slave : None
Secondary Master :IC35L040AVVA07-0 VA2OA52A
Secondary slave :None
Flopy disk (s) fail (40)
Press F1 to continue, DEL to enter setup
05/30/2005 – i845 – 6A69VTR9C – 00
这是怎么回事啊，昨天是正常关机，电脑一直都好好的，怎么出现这种情况啊
按了DEL 后，出现
Phoenix – AwardBIOS CMOS Setup Utility
▼Standard CMOS Features Load Fail – safe Defaults
▼Advanced BIOS Features Load Optimized Defaults
▼Advanced Chipest Features Set Supervisor Password
▼Integrated Peripherals Set User Password
▼Power Management Setup Save & Exit Setup
▼PnP / PCI Configurations Exit Without Saving
▼Frequency / Voltage Control
Esc : Quit
Phoenix – AwardBIOS V6.00PG,An Energy Star Ally
Copyright (C) 1984-2003 , Phoenix Technologies,LTD
Intel 845PE-06
Primary Master : None
Primary Slave : None
Secondary Master :IC35L040AVVA07-0 VA2OA52A
Secondary slave :None
Flopy disk (s) fail (40)
Press F1 to continue, DEL to enter setup
05/30/2005 – i845 – 6A69VTR9C – 00
这是怎么回事啊，昨天是正常关机，电脑一直都好好的，怎么出现这种情况啊
按了DEL 后，出现
Phoenix – AwardBIOS CMOS Setup Utility
▼Standard CMOS Features Load Fail – safe Defaults
▼Advanced BIOS Features Load Optimized Defaults
▼Advanced Chipest Features Set Supervisor Password
▼Integrated Peripherals Set User Password
▼Power Management Setup Save & Exit Setup
▼PnP / PCI Configurations Exit Without Saving
▼Frequency / Voltage Control
Esc : Quit
按F1就好了 bios恢复了出厂设置，你要是会的话，可设置软驱为无，不会设置的话 按F1跳过就行了，不影响使用
启动时按“Delete”键进入BIOS：
1.关闭软驱
STANDARD CMOS → Drive A：None
关闭这个就可以了 就是进入第一项，把哪个1.44M的软驱关闭就可以了重起后就不用按F1了
如果还是不行 那就是主板电池没电了 更换电池
没是,我家的电脑跟你一样,按F1就好了,有可能bios没电了.Press F1 to continue, DEL to enter setup
05/30/2005 – i845 – 6A69VTR9C – 00
从这里可以看出!
重新起动试试看
按F1 看看什么情况 可能主板没电池了
也许是显卡坏了,检查一下.