UC知道不懂中翻英
来源：百度知道 编辑：UC知道 时间：2024/05/25 02:19:13
所需要的工器具：水，刷子，盛装水（化学物）的容器 、抹布
具体操作步骤：
1、 确保产品已经生产完。
2、 把电源关掉。
冲洗前要确定金属探测仪周围的产品已经拉走，确保冲洗时水飞溅不到产品外箱上。
3、 清洗前先把洗洁精放在容器里稀释。
4、 清洗金属探测仪分成两部分：①、先清洁金属探测仪的输送带，②、再清洗金属探测仪的不锈钢架。
5、 用清水冲走残留在金属探测仪不锈钢架上的虾脚下料或杂物冲掉。
6、 先用湿抹布抹干净金属探测仪的输送带，接着用酒精喷洒在输送带上。
7、 然后用刷子贴着已稀释好的洗洁精开始涮洗不锈钢架，特别要注意架子上的虾脚料或杂物，都要涮洗掉。
8、 再用清水把不锈菌钢架上的泡沫冲洗干净，冲冼顺序是从上到下。
9、 最后用专盖金属探测仪的布套，遮盖好金属探测仪。
Needs chemical: Ethyl alcohol, liquid detergent
Needs labor appliance: Water, brush, splendid attire water (chemical material) vessel, cleaning rag
Concrete operations step:
1, guaranteed that the product already produced.
2, switches off the power source.
Before the flushing, must determine around the metal sounding set's product already to carry off, guaranteed when flushing the water did not splash outside the product in the box.
3, before the clean, places the liquid detergent in the vessel to dilute first.
4, the wash metal sounding set divides into two parts:①, is first clean the metal sounding set the conveyor belt,②, again wash metal sounding set's stainless steel frame.
5, washes away with the clear water remains flushes out on the metal sounding set stainless steel frame's shrimp foot yummy treats or the sundry goods.
6, uses the wet cleaning rag to wipe the clean metal sounding set's conveyor belt