UC知道哪位帅哥帮我英翻汉3？？？？？？？
来源：百度知道 编辑：UC知道 时间：2024/05/29 17:21:57
In order to avoid slag build up in the second pass, ash softening temperatures for straw and
wood have been considered. At 50% boiler load the flue gas temperature at the inlet of the
second pass reaches the softening temperature for straw ash (650-700°C). The softening
temperature for wood ash is above 1000°C, which is higher than the full load flue gas
temperature at the inlet of the second pass. This indicates that load limitation must be put on
straw and straw mixtures. However, experience must show which load levels are suitable for
wood and straw.
The milling system is designed for operation with one fuel type per mill and some of the
possible mill combinations are shown in Figure 4. In single fuel mode full boiler load can be
achieved on coal or wood. Mixing of coal and wood can also meet full boiler load with 3
mills in operation. There is also capacity for full load on mixing of coal and straw as well as
wood and straw. Th
wood have been considered. At 50% boiler load the flue gas temperature at the inlet of the
second pass reaches the softening temperature for straw ash (650-700°C). The softening
temperature for wood ash is above 1000°C, which is higher than the full load flue gas
temperature at the inlet of the second pass. This indicates that load limitation must be put on
straw and straw mixtures. However, experience must show which load levels are suitable for
wood and straw.
The milling system is designed for operation with one fuel type per mill and some of the
possible mill combinations are shown in Figure 4. In single fuel mode full boiler load can be
achieved on coal or wood. Mixing of coal and wood can also meet full boiler load with 3
mills in operation. There is also capacity for full load on mixing of coal and straw as well as
wood and straw. Th
为了避免在第二张通行证的炉渣组合，秸杆的灰软化温度和木头被考虑。 在50 _锅炉装载废气温度在入口
其次通行证到达秸杆灰的(650-700°C)软化温度。 变柔和
木灰的温度在1000°C之上，高于满载的废气温度在第二张通行证的入口。 这表明在秸杆和秸杆混合物必须投入装载局限。 然而，经验必须显示哪些装载水平适用于木头和秸杆。
碾碎的系统为与一个燃料类型的操作设计每个磨房，并且某些可能的磨房组合在表4.显示。 在唯一燃料方式充分的锅炉装载在煤炭或木头可以达到。 混合煤炭和木头可能也遇见与运转中3个的磨房的充分的锅炉装载。 也有满载的容量在混合煤炭和秸杆并且木头和秸杆。 生物量的典型的运用将是在生物量的唯一生火或cofiring与在生物量的一个磨房和在煤炭的一两个磨房。 根据当前标准
(EN 450)从co生火煤炭和生物量的飞烟可以用于混凝土，只要极小的煤炭流量是80_。 然而，交替法预计准许
对40 _生物量未回收的一般来说和50在木头特殊情况的_。
在第一和通行证其次增加HP和RH管捆绑的沥青与常规设计比较为了避免阻拦由炉渣。 使用翅片管
在去除之后，在锅炉在ECO也被避免和首先被介绍飞烟的粗糙的分数。