UC知道急！机械毕业论文的中文摘要翻译成英文摘要
来源：百度知道 编辑：UC知道 时间：2024/06/23 20:07:54
冷拔复合管生产中，目前生产厂家主要的打头方式是人工进行，效率低并且质量不高。本文主要是针对冷把复合管打头的基本要求，设计出满足工艺要求的机械装置，适应管规格Φ20-Φ60，壁厚外管0.5mm，内管1.5mm，打头长度不大于200mm，打头一次成型。本装置采用齿轮传动，再通过凸轮机构将转动变为平动，带动模具打压冷拔复合管坯，使其达到工艺要求。从而提高了冷拔复合管生产的效率与质量。
关键词：复合管；打头；齿轮；凸轮；转动；平动
Chinese Summary
Cold-drawn composite pipe production, the major manufacturers is the beginning of artificial means, low efficiency and high quality. This paper is mainly directed against the cold of the beginning of the basic requirements, design technology to meet the requirements of the mechanical devices to meet the specifications Φ20-Φ60, pipe wall thickness of 0.5 mm, possession of 1.5 mm, beginning length of not more than 200 mm, a first time Molding. This device used gear drive, and then through the cam will rotate into translation, driven composite drawing tube mold pressure to achieve technological requirements. So as to enhance the composite drawing of the production efficiency and quality.
Key words: composite pipe; beginning; gear; cam; rotation; translation