UC知道请看看我的电脑怎么了
来源：百度知道 编辑：UC知道 时间：2024/06/20 15:26:41
屏幕提示:
A problem has been detected and windows has been shut down to prevent damag to your computer.
The problem seems to be caused by the following file:win32k.sys
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,restart your commputer,if this screen appears again,follow thest steps:
Check to make sure any new hardware or software is properly installed.If this is a new installation, ask you hard or software manufacturer for any windows updates you might need.
If problem contionue, disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing .
If you need to use safe Mode to remove or disable components,restart remove or disable components,restart your computer,press F8 to select advanced startup options,and then select saft Mode.
Technical ingormation:
***STOP:0X0000050(0XAF9AB884,0X00000000,0XBF8F3802,0X00000000)
***
A problem has been detected and windows has been shut down to prevent damag to your computer.
The problem seems to be caused by the following file:win32k.sys
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,restart your commputer,if this screen appears again,follow thest steps:
Check to make sure any new hardware or software is properly installed.If this is a new installation, ask you hard or software manufacturer for any windows updates you might need.
If problem contionue, disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing .
If you need to use safe Mode to remove or disable components,restart remove or disable components,restart your computer,press F8 to select advanced startup options,and then select saft Mode.
Technical ingormation:
***STOP:0X0000050(0XAF9AB884,0X00000000,0XBF8F3802,0X00000000)
***
如果不是系统问题(安装的系统本身就没问题)
是不是驱动造成的冲突
如果换了驱动不是,就逐一排除硬件问题,找一些朋友一起测试 把硬件逐一更换,更换成正常的,看哪个硬件出了问题
不过造成蓝屏大多是内存问题
如果不是内存问题,其他的检查了么
内存坏了。。。
你说的是开机蓝屏吧，真是为难你了，还抄了这么多下来，你把内存换一个内存位置试试，如果你是两根的话取一个，两根来回的换着试。上面显示你的内存错误！
内存拔掉一跟
转贴
具体操作如下：修改注册表键值，将HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\RestrictAnonymous的值由0修改为1即可。试验了一下，我的Windows 2003 Server又恢复正常工作了。
还有就是你的硬件，如显卡不支持DIRECTX9,卸载它