英语翻译~·· 急需帮忙, 不要在线翻的

来源:百度知道 编辑:UC知道 时间:2024/06/23 13:09:46
成列电柜安装排列要整齐、紧密、美观。单柜垂直度每米偏差不允许大于1.5mm,成列安装时柜面和柜顶偏差均不允许大于5mm。单柜接地导体截面不能小于6mm2,连接要可靠。电柜安装完成后, 对柜内联络母线检查连接情况,按设计系统图复检二次回路元件设置及接线情况,检查电动或手动操作装置是否灵活,测试绝缘电阻及接地电阻,然后进行通电试验调整,检查柜面灯光,仪表运行情况。 并做好测试记录。(小型动力配电箱安装按照明系统配电箱施工方法)。

Display shelves assembly must be neat, firm and presentable. Single shelf tolerance shall be less than 1.5mm per meter, the difference between shelves shall not exceed 5mm. .... 太长了

Cheng Liedian the cabinet installment arrangement must neat, be close, be artistic. Single cabinet verticality each meter deviation does not allow to be bigger than 1.5mm, becomes the row installs when the cabinet surface and the cabinet go against the deviation not to allow to be bigger than 5mm. The single cabinet earth conductor section cannot be smaller than 6mm2, the connection must be reliable. After the electricity cabinet installment completes, contacts the bus bar inspection connection situation to the cabinet, duplicate examines the secondary circuit part establishment and the wiring situation according to the design diagram, the inspection electrically operated or the manual operation installs whether nimbly, the test dielectric resistance and the earth resistance, then do make the circ