UC知道电脑昨天还好好 今天开机显示正常启动这个界面
来源：百度知道 编辑：UC知道 时间：2024/09/21 18:20:26
启动读条后直接转入这个界面
A problem has been detected and Windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following files:nv4_disp
If this is the first time you have seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vender for any driver updates.
Technical information:
***STOP:0X000000EA
(0X816C3020, 0X81A77A58，0XF88C6CB4，0X00000001)
求详细解决方法。高手门帮帮忙。是什么原因。昨天晚上关机的时候关不了
然后我就直接强行关机的。
A problem has been detected and Windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following files:nv4_disp
If this is the first time you have seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vender for any driver updates.
Technical information:
***STOP:0X000000EA
(0X816C3020, 0X81A77A58，0XF88C6CB4，0X00000001)
求详细解决方法。高手门帮帮忙。是什么原因。昨天晚上关机的时候关不了
然后我就直接强行关机的。
硬盘受了点损伤，没啥大问题，重装一下就又好了
使用VGA模式，上网下个显卡的最新驱动
一问题已发现和Windows已经关闭，以防止损害到您的计算机。
这个问题似乎是造成下列文件： nv4_disp
如果这是您第一次看到这种停止错误屏幕，重新启动计算机。如果此屏幕再次出现，请执行下列步骤：
设备驱动程序得到停留在一个无限循环。这通常表示的问题，与设备本身或与设备驱动程序的硬件错误。
请检查您的硬件设备供应商的任何驱动程式更新。
应该是系统文件的问题，可能受损，建议从装系统！
这些都高手啊.
昨天做好了系统.没有问题.
当然是硬件出问题了.要不怎么会蓝屏
建议楼主换换内存试试.
或者在BIOS里观察一下CPU温度.看是不是很高60度以上算是超标.
如果是新机器的话.应该是CPU没有装好.
如果是旧机器的话.应该是导热硅脂烧干了.起不了多大作用了
把原来的硅脂给擦掉重新上一点(如果不是很专业,建议不要把CPU拆下来
只把风扇插下来擦硅脂就好了.)
这样的情况一般都是硬件有问题.
别想系统的原因了!.