UC知道启动proe3.0出现这些，然后就不行了
来源：百度知道 编辑：UC知道 时间：2024/06/06 18:55:05
License request failed for feature PROE_200: -97:
The desired vendor daemon is down.
Displaying status for license file: 7788@XTZJ-42F6EB1541
License Server: XTZJ-42F6EB1541
Warning (-97): The desired vendor daemon is down.
Check the lmgrd log file, or try lmreread.
Feature: PROE_200
Vendor:Host: XTZJ-42F6EB1541
License path: 7788@XTZJ-42F6EB1541
FLEXnet Licensing error:-97,121
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Warning (-97): The desired vendor daemon is down.
Check the lmgrd log file, or try lmreread.
Feature: PROE_200
Vendor:Host: XTZJ-42F6EB1541
License path: 7788@XTZJ-42F6EB1541
FLEXnet Licensing error:-97,121
For further information, refer to the FLEXnet Licensing End User Guide,
availa
The desired vendor daemon is down.
Displaying status for license file: 7788@XTZJ-42F6EB1541
License Server: XTZJ-42F6EB1541
Warning (-97): The desired vendor daemon is down.
Check the lmgrd log file, or try lmreread.
Feature: PROE_200
Vendor:Host: XTZJ-42F6EB1541
License path: 7788@XTZJ-42F6EB1541
FLEXnet Licensing error:-97,121
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Warning (-97): The desired vendor daemon is down.
Check the lmgrd log file, or try lmreread.
Feature: PROE_200
Vendor:Host: XTZJ-42F6EB1541
License path: 7788@XTZJ-42F6EB1541
FLEXnet Licensing error:-97,121
For further information, refer to the FLEXnet Licensing End User Guide,
availa
如果你准备工作（添加环境变量，网卡号，注册表等）做好的话
就是破解的问题了
将Crack目录里的PTC-WF3-M040.exe文件分别拷贝到
proeWildfire 3.0\i486_nt\obj运行破解proeWildfire，再将其拷贝到mechWildfire 3.0\i486_nt\bin运行破解ENGINEER Machanica，再将其拷贝到ptc_distributed_services
\i486_nt\obj运行，到处主程序及所有功能插件及工具都完美破解
本上遇到这问题遇！解决：先装个虚拟网卡（方法网上有）！记下id号！然后重生成license文件（别只是简单替换）！接着回到proe／bin／ptcsetup 双击它！然后和第一次装时一样! 保你5分钟解决不影响上网！