UC知道帮忙请翻译一段技术资料 谢谢
来源：百度知道 编辑：UC知道 时间：2024/05/24 08:28:11
Touch panel
The TSC2046 is a classic successive approximation register (SAR) analog-to-digital converter (ADC). The architecture is based on capacitive redistribution, which inherently includes a sample-and-hold function. The converter is fabricated on a 0.6um CMOS process. The basic operation of the TSC2046 is shown. The device features an internal 2.5V reference and uses an external clock. Operation is maintained from a single supply of 2.7V to 5.25V. The internal reference can be overdriven with an external, low-impedance source between 1V and +VCC. The value of the reference voltage directly sets the input range of the converter.
The analog input (X-, Y-, and Z-Position coordinates, auxiliary input, battery voltage, and chip temperature) to the converter is provided via a multiplexer. A unique configuration of low on-resistance touch panel driver switches allows an unselected ADC input channel to provide power and the accompanying pin to provide ground for an e
The TSC2046 is a classic successive approximation register (SAR) analog-to-digital converter (ADC). The architecture is based on capacitive redistribution, which inherently includes a sample-and-hold function. The converter is fabricated on a 0.6um CMOS process. The basic operation of the TSC2046 is shown. The device features an internal 2.5V reference and uses an external clock. Operation is maintained from a single supply of 2.7V to 5.25V. The internal reference can be overdriven with an external, low-impedance source between 1V and +VCC. The value of the reference voltage directly sets the input range of the converter.
The analog input (X-, Y-, and Z-Position coordinates, auxiliary input, battery voltage, and chip temperature) to the converter is provided via a multiplexer. A unique configuration of low on-resistance touch panel driver switches allows an unselected ADC input channel to provide power and the accompanying pin to provide ground for an e
触摸面板
TSC2046 是典型的逐次逼近积存式（SAR)模拟-数字转换器(ADC).该设计是基于固有地包含取样-和-维持功能的电容性再分配。转换器制在0.6 微秒的互补型金属氧化物半导体处理器上。该转换器TSC2046的基本操作如图所示。装置的特性为：内基准准电压2.5 伏，并使用外时钟。2.7 伏到2.25 伏的单相电源可维持操作。内基准电压可由外时钟，1 伏到+VCC之间的低阻抗电源过载驱动。基准电压值可直接设定成转换器的输入范围。
给转换器的模拟输入（X，Y和Z位置坐标，辅助输入，电池电压和晶片温度）通过多路调制器提供。低启动阻抗触摸式面板驱动器开关，可允许非选的ADC输入频道进行供电，附加的销柱可为外部装置如触摸护罩提供接地。维持对转换器的微分输入和微分标准设计电压，就可能拒绝从每个触摸面板驱动器开关的启动阻抗来的误信号（如果这是特殊测量的误信号源）