UC知道TECHNICAL CONDITION FOR LINEPIPES COATING是什么东西?
来源：百度知道 编辑：UC知道 时间：2024/05/06 02:03:43
以下说的是什么东西?
TECHNICAL CONDITION FOR LINEPIPES COATING
Polyethylene pipeline coating material for inner wrap,
Black color, in form of roll.
-6" Wide X 200 ft approximately.
-Thickness: Not less than 15 mils.
-Dielectric strength: Not less than 15 Kv. For the above required thickness, Or not less than 1 K.v for each mils
-Internal core diameter: 1 1/2".
All material shall be complied with DIN 30670 or Equivalent.
TECHNICAL CONDITION FOR LINEPIPES COATING
Polyethylene pipeline coating material for inner wrap,
Black color, in form of roll.
-6" Wide X 200 ft approximately.
-Thickness: Not less than 15 mils.
-Dielectric strength: Not less than 15 Kv. For the above required thickness, Or not less than 1 K.v for each mils
-Internal core diameter: 1 1/2".
All material shall be complied with DIN 30670 or Equivalent.
技术条件涂料
聚乙烯管道涂层材料的内包装，
黑颜色，在形式推出。
-6 “宽x二○○英尺大约。
厚度：不少于15 mils 。
介质强度：不小于15千伏。基于上述要求的厚度，或不小于1千伏为每个mils
内部核心的直径： 1 / 2 “ 。
所有材料应符合标准三万○六百七十或同等学历。
楼上的请不要用机器翻译来糊弄人