UC知道PROTEL 原理图转PCB板图
来源：百度知道 编辑：UC知道 时间：2024/05/19 10:01:23
Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
K1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
K1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
Setup Error: GND Spice Reference Net (specified in Analog Options) is not in the schematic.
这些都是什么问题？ 高手请教一下！！！
K1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
K1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
Setup Error: GND Spice Reference Net (specified in Analog Options) is not in the schematic.
这些都是什么问题？ 高手请教一下！！！
part type是属性里面的东西，你检查一下你属性设置正确没有。
Setup Error: GND Spice Reference Net (specified in Analog Options) is not in the schematic.
Setup Error: 模拟地的网络标号不再原理图中。
可能是原理图中没有模拟地，只有数字地。