UC知道铣槽机的英文翻译
来源：百度知道 编辑：UC知道 时间：2024/05/21 15:44:33
...The movable carriage is moved by two chain-drives.There are also the removable head-stock and the dead-head.
The log is centered by the hydraulic jacks between the head-stock and the dead-head.
Cutting is done by the heavy-duty cutter.it moves along the log.it can cut up to 50 mm in diameter.
Then the final cutter starts working.
The heavy-duty cutter mills the long slot.It moves along the fixed log.
The carriage stops at the mark where the milling of the transverse slot(the cup) is required.
In order to avoid vibration and rotation of the log while cutting the long slot and the cups,we prop up the log by the special stay.It is easy in use.
We use the final cutter to cut the first cup.it works with an electrical drive.
After finishing cutting the first cup,the mill moves away to the necessary distance.
.....
The log is centered by the hydraulic jacks between the head-stock and the dead-head.
Cutting is done by the heavy-duty cutter.it moves along the log.it can cut up to 50 mm in diameter.
Then the final cutter starts working.
The heavy-duty cutter mills the long slot.It moves along the fixed log.
The carriage stops at the mark where the milling of the transverse slot(the cup) is required.
In order to avoid vibration and rotation of the log while cutting the long slot and the cups,we prop up the log by the special stay.It is easy in use.
We use the final cutter to cut the first cup.it works with an electrical drive.
After finishing cutting the first cup,the mill moves away to the necessary distance.
.....
…可移动的支架由二移动链子驾驶。也有可移动的床头柜和免费乘客。
The日志由在床头柜和免费乘客之间的水力插座集中。
Cutting由沿log.it的耐用cutter.it移动完成可能削减直径的50 mm。 最后的切削刀起动运转的Then。
The耐用切削刀碾碎长的槽孔。它沿固定的日志移动。
The支架停止在碾碎横向槽孔的标记(杯子)需要。
为了避免日志的振动和自转，当切开长的槽孔和杯子时，我们由特别逗留扶植日志。它是容易在使用中。
We用途最后的切削刀切开第一cup.it与电子驱动一起使用。 切开第一个杯子的After精整，磨房搬走向必要的距离。
.....