UC知道我要装系统，出现了蓝屏这样的代码。怎么解决？A problem has been detected and windows has
来源：百度知道 编辑：UC知道 时间：2024/06/03 15:46:14
A problem has been detected and windows has been shut down to prevent damage to your Computer.
If this is the first time you've seen this stop error Screen,restart your Computer.If this screen appears again,follow these steaps:
Check for riruses on your computer.Remove any newly installed hard drives or hard drive controllers.Checre your hard drive to make sure it is Properly configured and terminated,Run CHKDSK /F to check for hard drive corruptien,and then restare your computer.
Technical information:
***Stop:0×0000007B(0×F78D2524,0×C0000034,0×00000000,0×00000000)
If this is the first time you've seen this stop error Screen,restart your Computer.If this screen appears again,follow these steaps:
Check for riruses on your computer.Remove any newly installed hard drives or hard drive controllers.Checre your hard drive to make sure it is Properly configured and terminated,Run CHKDSK /F to check for hard drive corruptien,and then restare your computer.
Technical information:
***Stop:0×0000007B(0×F78D2524,0×C0000034,0×00000000,0×00000000)
典型的蓝屏错误，依次排除：
。安装光盘问题，可更换光盘
。安装操作系统期间，BIOS设置中应设定"CPU病毒报警"为不报警
。内存损坏或者接触不良
。硬盘坏道
引导区或者主板有问题...先找个主板测试下...如果可以排除掉的话，建议硬盘格了重新分区...
蓝屏 现在可以解决了啊 你下载个360 维护就好了`
你把内存条拔下重插插实了，然后再格式化重装试试，可能是内存条松动或是损坏，造成安装时，系统要从内存交换数据时出现问题的
说明你硬件有问题，是不是你最近加了内存或是声卡什么的硬件呀？我以前是遇到过的，把新加的内存拔下来，安装操作系统，安装完了再把内存插上就可以了！
0x0000007B:INACESSIBLE_BOOT_DEVICE
◆错误分析:Windows在启动过程中无法访问系统分区或启动卷. 一般发生在更换主板后第一次启动时, 主要是因为新主板和旧主板的IDE控制器使用了不同芯片组造成的. 有时也可能是病毒或硬盘损伤所引起的.
◇解决方案:一般只要用安装光盘启动电脑, 然后执行修复安装即可解决问题. 对于病毒则可使用DOS版的杀毒软件进行查杀(主战有kv2005DOS版下载). 如果是硬盘本身存在问题, 请将其安装到其他电脑中, 然后使用"chkdsk /r"来检查并修复磁盘错误.