UC知道新换了块显卡，装上后出了这问题~~~~~
来源：百度知道 编辑：UC知道 时间：2024/06/24 16:49:36
新换了块7600GT的AGP，到进度条的时候都正常，进度条完了就蓝屏，出现了下面的一片字：
A problem has been detected and windows has been shut down to prevent damage to your computer
If this is the first time you are see this stop error screen restart you computer . If this screen appears again follow these steps:
Check to be sure you have adequate disk space .If a driver is identified in the stop message, disable the drive or check with the man facture for driver dates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates . Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components restart your computer , press F8 to select Advanced startup options and then select safe mode.
Technical information:
Stop: 0x0000007E (0xC0000005,0xB9769184,0xBA502D3C,0xBA502A38)
大家帮你看看哪出问题了~~~~
PS： 我插集成显卡一点问题都没~~~~~~
A problem has been detected and windows has been shut down to prevent damage to your computer
If this is the first time you are see this stop error screen restart you computer . If this screen appears again follow these steps:
Check to be sure you have adequate disk space .If a driver is identified in the stop message, disable the drive or check with the man facture for driver dates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates . Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components restart your computer , press F8 to select Advanced startup options and then select safe mode.
Technical information:
Stop: 0x0000007E (0xC0000005,0xB9769184,0xBA502D3C,0xBA502A38)
大家帮你看看哪出问题了~~~~
PS： 我插集成显卡一点问题都没~~~~~~
Try changing video adapters.
显卡驱动出了问题，先在COMS里面设置成独立显卡模式，然后进到界面里安装好独立显卡的驱动。
BIOS出问题了,刷BIOS吧
显卡驱动没装好。试着在安全模式下试试，看能启动吗？
换完显卡后，要重装系统，重装显卡驱动，不然直接就开机的话驱动错误就会蓝屏