请问ROS软路由怎么进行双线切换，怎么限速。。。

ROS 2.9.27做成双线后的自动切换的脚本
/ system script
add name="dxup" source="/ip route set \[/ip route find comment=tel\] \
gateway=电信网关;
\n/ip route set \[/ip route find comment=tel\] \
disable=no;" policy=ftp,reboot,read,write,policy,test,winbox,password
add name="cncup" source="/ip route enable \[/ip route find \
gateway=网通网关\]" \
policy=ftp,reboot,read,write,policy,test,winbox,password
add name="dxdown" source="/ip route set \[/ip route find comment=tel\] \
gateway=网通网关" \
policy=ftp,reboot,read,write,policy,test,winbox,password
add name="cncdown" source="/ip route disable \[/ip route find \
gateway=网通网关\]" \
policy=ftp,reboot,read,write,policy,test,winbox,password

复制上面的脚本在WINBOX中选new terminal 中右键paste回车就可以了~~

回车一下。。检测线路状态策略添好了~~

/ syste