翻译机械英语2 times M10 going over to diameter 8.5 in the middle of the 21mm
来源:百度知道 编辑:UC知道 时间:2024/06/05 04:20:39
2 times M10 going over to diameter 8.5 in the middle of the 21mm
哎~
经理明白了,说是斜切什么的!
哎~
经理明白了,说是斜切什么的!
在21mm处的中部钻直径为8.5的孔后分两次攻M10螺纹。
哈哈,是我!~~
什么加工方法,是有关车削加工吗?
1.在21mm处的中部反复两次表面加工后从M10到直径8.5
2.在21mm处的中部用M10的刀具两次表面加工到直径8.5
这两个不知道哪个,你根据前后句看看
用M10的丝锥攻8.5直径的孔两次,使其长度为21.5。
2倍M10驱逐前往直径8.5中的21毫米