请教从外地拨号连公司PIX VPN的配置

来源：百度知道 编辑：UC知道 时间：2024/05/07 04:32:59
没弄过VPN 请教高手如何配置 从外地拨号到公司PIX VPN上的方法
公司防火墙PIX515E IP61.152.139.139 网关61.152.139.138
IP地址池172.16.1.100 - 150
请教在超级终端上如何配置VPN可以从外地拨号接入内部网络
VPN Clinet因该填些什么
另：主要是想问添加个用户的和用户客户端怎么配置

听你的描述，像是做L2TP，估计你现在也应该用8.02的IOS了，给个8.02的配置
Step 1
Specify IPSec to use transport mode rather than tunnel mode with the mode keyword of the crypto ipsec transform-set command:

hostname(config)# crypto ipsec transform-set trans_name mode transport

Step 2 (Optional) Specify the local address pool used to allocate the IP address to the client using the address-pool command in tunnel-group general-attributes mode:

hostname(config)# tunnel-group name general-attributes
hostname(config-tunnel-general)# address-pool pool_name

Step 3 (Optional) Instruct the security appliance to send DNS server IP addresses to the client with the dns value command from group policy configuration mode:

hostname(config)# group-policy group_policy_name attributes
hostname(config-group-policy)# dns value [none | IP_primary[IP_secondary]]

Step 4 (Optional) Instruct the security appliance to send WINS server IP addresses to the