UC知道电脑蓝屏不能正常启动怎么办？
来源：百度知道 编辑：UC知道 时间：2024/05/23 17:14:18
A problem has been detected and windows has been shut down to prevent damage to your conputer.
Unmountable boot volume
If this is the first time you've seen this Stop error screen,restart you computer.If this screen copears again, follow these steps:
Check to make sure any new hardware or software is properly installed.If this is a new installation,asd your hardware or software manufacturer for any windwos updates you might need.
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory option such as caching or shadowing.If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select Safe Mode.
Technical Information
***STOP 0×0000009F(0×00000500,0×00000002,0×FF7A6F18,0×816A9BD0)
Unmountable boot volume
If this is the first time you've seen this Stop error screen,restart you computer.If this screen copears again, follow these steps:
Check to make sure any new hardware or software is properly installed.If this is a new installation,asd your hardware or software manufacturer for any windwos updates you might need.
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory option such as caching or shadowing.If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select Safe Mode.
Technical Information
***STOP 0×0000009F(0×00000500,0×00000002,0×FF7A6F18,0×816A9BD0)
一是系统崩溃，重装，，，，二是硬盘坏掉或者出现坏道， 三是硬盘数据线出现问题，重新插拔一下或者换一根看看
“STOP 0x0000009F DRIVER_POWER_STATE_FAILURE”错误信息。 当驱动程序没有正确处理电源状态转换请求时，就会出现此问题。此错误信息大多发生在下列某一操作中： 关机挂起或从待机模式恢复挂起或从休眠模式恢复 要避免出现此错误信息，请更新或删除引起问题的驱动程序。此问题不仅限于设备驱动程序，它还可能出现在文件系统筛选器驱动程序（例如，由防病毒、远程控制或备份程序安装的驱动程序）中. 驱动==电源===状况,状态===失败，呵呵，应该是远程吧什么鸟的，去微软看看吧
◆错误分析:往往与电源有关系, 常常发生在与电源相关的操作, 比如:关机、待机或休睡.
◇解决方案:重装系统, 如果不能解决, 请更换电源.
右键“我的电脑”－－属性－－高级－－点“启动和故障恢复”里的“设置”－－在“系统失败”里选上“自动重新启动”－－确定，重启就OK～对比了一下注册表，导入下面这个注册表是同样的效果～
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl]
"AutoReboot"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\CrashControl]
"AutoReboot"=dword:00000001
重装系统试试，2电脑硬件不兼容
sdfawf