UC知道帮忙翻译一下很短
来源：百度知道 编辑：UC知道 时间：2024/06/10 21:36:02
Geometric error is introduced due to imperfection or
imprecision of structural elements and components used in assemblies or subassembly level whereas kinematic error is
introduced by the motion of the rigid bodies to reach the exact desired position. Geometric and kinematic errors are
considered as interrelated errors. Stiffness error is introduced due to lack of stiffness of machine bodies or having some
extent of elastic behavior under loading and unloading conditions. Thermal errors are mainly the major cause of
dimensional errors having a non linear behavior and due to its non linear behavior it is quite difficult to estimate exactly.
Dynamic errors originated from spindle motion, vibration affecting the machine structure and itself vibration in internal
components of machine tools and controller errors fall in this category. Besides these main errors there is some other
errors including cutting force induced errors, tool wear errors and fix
imprecision of structural elements and components used in assemblies or subassembly level whereas kinematic error is
introduced by the motion of the rigid bodies to reach the exact desired position. Geometric and kinematic errors are
considered as interrelated errors. Stiffness error is introduced due to lack of stiffness of machine bodies or having some
extent of elastic behavior under loading and unloading conditions. Thermal errors are mainly the major cause of
dimensional errors having a non linear behavior and due to its non linear behavior it is quite difficult to estimate exactly.
Dynamic errors originated from spindle motion, vibration affecting the machine structure and itself vibration in internal
components of machine tools and controller errors fall in this category. Besides these main errors there is some other
errors including cutting force induced errors, tool wear errors and fix
几何误差介绍，由于缺陷或
不精确的结构元件和部件中使用的组件或组件的水平，而运动误差是
介绍了该运动的刚体达到理想的确切位置。几何和运动误差
被视为相互关联的错误。刚度误差介绍，由于缺乏刚性的机器有一些机构或
弹性行为的程度下装货和卸货的条件。热误差主要是主要原因
三维错误有非线性行为和由于其非线性行为是相当困难估计完全相同。
动态误差来源于主轴运动，振动影响和本身的机械结构振动的内部
部分机床和控制器错误属于这一类。除了这些主要错误有一些其他
错误包括切削力引起的误差，刀具磨损的错误和装夹误差。