UC知道盈通945主扳BIOS里没有SATA硬盘模式设置？
来源：百度知道 编辑：UC知道 时间：2024/05/30 05:37:37
朋友电脑中毒了，需要重装系统，可使用任何版本的XP（手装版也试了）均告失败。。。
打算用DM分区，可屏幕提示：
“
Disk Manager has detected an incompatible CMOS geometry for this drive which contains more
than 16 heads. To correct this problem, enter your CMOS setup and perform one of the following:
-If your system has a drive type that will automatically detect ATA/IDE drives(AUTO), use it. Most
Pentium and newer 486 systems have AUTO drive types.
-If your system has a user-definable drive type(UDT), set it to the parameters for your drive as
supplied by the manufacturer.
If your system does not have an AUTO or UDT, choose a drive type that closely matches the
capacity of your drive or choose type 1.
Press ALT-C to continue the installation which will result in an incorrect hard disk capacity,
or press any other key to abort the installation.
打算用DM分区，可屏幕提示：
“
Disk Manager has detected an incompatible CMOS geometry for this drive which contains more
than 16 heads. To correct this problem, enter your CMOS setup and perform one of the following:
-If your system has a drive type that will automatically detect ATA/IDE drives(AUTO), use it. Most
Pentium and newer 486 systems have AUTO drive types.
-If your system has a user-definable drive type(UDT), set it to the parameters for your drive as
supplied by the manufacturer.
If your system does not have an AUTO or UDT, choose a drive type that closely matches the
capacity of your drive or choose type 1.
Press ALT-C to continue the installation which will result in an incorrect hard disk capacity,
or press any other key to abort the installation.
主要是DM的问题,它认为硬盘的磁头数目不应该多于16个.用别的分区工具试下.另外如果没有使用IDE接口的话,尝试在CMOS内禁用IDE controller.
是主板自带的驱动不兼容。。。你可以选择自己在BISS里设置你硬盘的规格。。大楷是这样。进入BISS里的第一个选项。那里能看到你硬盘。进入硬盘。你会看见AUTO。AUTO就是主板自带的40多种硬盘规格。你的硬盘规格就是不属于那里面。。你要做的就是把AUTO换成其他选。。
看下下面网站嘛。。。不知道是否能帮你解决