UC知道汉译英，请专业大虾帮忙？
来源：百度知道 编辑：UC知道 时间：2024/06/01 13:21:46
操作流程
1.押出机机头38-48℃（注：生产内围条为50-60℃）
2.启动押出机主机，调整转速
3.启动送料滚轮，调整送料速度与出料速度匹配
4.开始送料，打开冷却水
切片机
操作流程
1.开启冷却水
2.加入硬脂酸镁溶液
3.调整转速和割刀速度
4.切片并平整铺放
压延机
操作流程
1.关闭冷却水，打开蒸汽，使滚轮升温至35-45℃（生产内围条时温度为60-70℃）
2.将转速调至1档，启动压延机
3.开始送料，测量厚度
4.调整出片两边厚度至标准厚度
5.出料调至2档，关闭蒸汽，送冷却水
Extruder
Operational processes
1. Extruder head 38-48 ℃ (Note: Article for the production of inner 50-60 ℃)
2. Start Extruder host, adjust the speed
3. Start feeding wheel to adjust the feed speed and feed speed match
4. The beginning of feeding, open the cooling water
Slicer
Operational processes
1. Open the cooling water
2. By adding magnesium stearate solution
3. Adjustment speed and the speed of cutting knife
4. Slice placement and formation
Calendar
Operational processes
1. Closed cooling water, open the steam, so that the wheel up to 35-45 ℃ (production Article inner temperature of 60-70 ℃)
2. The speed to 1 file, start the calendar
3. The beginning of feeding, measurement of the thickness of
4. To adjust the thickness of the film on both sides to standard thickness
5. The material to 2 files, shut down steam, cooling water delivery
machines
Operat