UC知道ug编程建立刀具库问题？
来源：百度知道 编辑：UC知道 时间：2024/05/26 18:53:17
ORMAT LIBRF T ST UGT UGST DESCR MATREF MATDES TLNUM ADJREG CUTCOMREG DIA FN HEI ZOFF DROT FLEN TIPA TAPA COR1 HDIA HLEN HTAP HOFF
# -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
DATA |XH-XD-5 |02|90|1 |1 |Φ5 白钢铣刀 |TMC0_00004|Carbide, Coated (Indexable - TiN, TiC, and Aluminum Oxide)|25 |25 |25 |5. |4 |130. |0.0 |1 |80. |0.0 |0.0 |0.0 |0.0 |0.0 |0.0 |0.0
DATA |DW-XD-5 |02|90|1 |1 |Φ5 白钢铣刀 |TMC0_00004|Carbide, Coated (Indexable - TiN, TiC, and Aluminum Oxide)|32 |32 |32 |5. |4 |130. |0.0 |1 |80. |0.0 |0.0 |0.0 |0.0 |0.0 |0.0 |0.0
DATA |XH-XD-6 |02|90|1 |1 |Φ6 白钢铣刀 |TMC0_00004|Carbide, Coated (Indexable - TiN, TiC, and Aluminum Oxide)|25 |25 |25 |6. |4 |130. |0.0 |1 |80. |0.0 |0.0 |0.0 |0.0 |0.0 |0.0 |0.0
DATA |DW-XD-6 |02|90|1 |1 |Φ6 白钢铣刀 |TMC0_00004|Carbide, Coated (Indexable - TiN, TiC, and Aluminum
# -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
DATA |XH-XD-5 |02|90|1 |1 |Φ5 白钢铣刀 |TMC0_00004|Carbide, Coated (Indexable - TiN, TiC, and Aluminum Oxide)|25 |25 |25 |5. |4 |130. |0.0 |1 |80. |0.0 |0.0 |0.0 |0.0 |0.0 |0.0 |0.0
DATA |DW-XD-5 |02|90|1 |1 |Φ5 白钢铣刀 |TMC0_00004|Carbide, Coated (Indexable - TiN, TiC, and Aluminum Oxide)|32 |32 |32 |5. |4 |130. |0.0 |1 |80. |0.0 |0.0 |0.0 |0.0 |0.0 |0.0 |0.0
DATA |XH-XD-6 |02|90|1 |1 |Φ6 白钢铣刀 |TMC0_00004|Carbide, Coated (Indexable - TiN, TiC, and Aluminum Oxide)|25 |25 |25 |6. |4 |130. |0.0 |1 |80. |0.0 |0.0 |0.0 |0.0 |0.0 |0.0 |0.0
DATA |DW-XD-6 |02|90|1 |1 |Φ6 白钢铣刀 |TMC0_00004|Carbide, Coated (Indexable - TiN, TiC, and Aluminum
一团糟
所以我不解决
但是我给你讲讲我们做事情的真正方法
第一，可以肯定不是用你的这个方法去做刀库的
第二，我们是使用模板制作刀库
第三，制作方法就是把你需要的刀具做好，单独储存到一个文件内，下次你需要的时候直接导入
如果你会宏录制，那你还可以做很多分类导入。
其他不多说了，望自己多关注一些现实的问题，一些工程师工作中的实际方法