UC知道电脑在意外断电之后无法正常开机，是系统文件损坏，如何重装？
来源：百度知道 编辑：UC知道 时间：2024/05/31 03:54:43
电脑意外断电之后无法正常开机，然后开机的时候前面都很正常，但在显示windows xp之后就出现了一个大蓝屏，一串英文大概意思是软硬件没装好，然后我把内存拆下来再重新装了下还不行，后来判断是d盘的一个系统文件损坏了，那现在应该是重装系统还是在重装盘里找出损坏的文件？应该怎么操作？跪求~~
在一开始开机的时候安全模式、最后一次设置进入和正常启动都不行
蓝屏显示的是：
a problem has been detected and windows has been shut down to prevent damage to your cumputer.
unmountable_boot_volume
if this is the first time you've seen this stop error screen,restart your computer/ if this screen appears again. follow
these steps:
check to make sure any new hardware or software is properly instlled.
if this is a new installation,ask your hardware or software manufacturer for any windows updates you might ennd
if problems continue, disable or remove any newly installed hardware or software. disable bios memory options such as caching
or shadowing.
if you need to use safe mode to remove or disable components. restart your computer,press F8 to select advanced startup
options, and then select
在一开始开机的时候安全模式、最后一次设置进入和正常启动都不行
蓝屏显示的是：
a problem has been detected and windows has been shut down to prevent damage to your cumputer.
unmountable_boot_volume
if this is the first time you've seen this stop error screen,restart your computer/ if this screen appears again. follow
these steps:
check to make sure any new hardware or software is properly instlled.
if this is a new installation,ask your hardware or software manufacturer for any windows updates you might ennd
if problems continue, disable or remove any newly installed hardware or software. disable bios memory options such as caching
or shadowing.
if you need to use safe mode to remove or disable components. restart your computer,press F8 to select advanced startup
options, and then select
重装系统吧
重装步骤：1,在启动计算机时即刻按 Delete (Del)【删除键】进入 BIOS【基本输入输出系统】设置.
2,选择 Advanced BIOS Features 【高级 BIOS 特性设置】,选择 Fast Boot 【快速引导】,并将 First Boot Device (1st Boot) 【第一启动设备】根据需要设置为 CDROM 【光盘启动】或 Floppy 【软盘启动】.具体操作:将光标移动到 First Boot Device (1st Boot),按 Enter 【回车键】,用光标键选择 CDROM 或 Floppy 再按 Enter 【回车键】,然后按 F10 当你看到类似 Save and exit setup? (Y/N)【是否保存设置并退出?】,你键入 Y ,也就是 Yes【是】,这时候计算机自动重启.
3,重启后插入 Windows XP安装光盘按提示操作! 这之后就很简单了
如果知道哪个文件损坏的话。利用带winpe的光盘启动电脑进入winpe后，恢复那个文件。否则重整。
是蓝屏还是黑白字？？蓝屏没说的重装吧，黑白字的话，在别的机子上作个U盘修复，估计你这可能是系统文件丢失
你先还原看看，如果不行就得从装系统了。
还原可以尝试一下，如果不行，用xp完整安装碟修复系统，再不行你就重装吧，这种情况基本可以断定是系统文件丢失
安全启动后，还原就可以了