用FLUENT模拟气液两相流遇到的问题
来源:百度知道 编辑:UC知道 时间:2024/05/10 12:02:00
做气液两相流的时候,选混合模型,压力入口和压力出口条件,气体选理想气体,液体是水,选择理想气体的时候就提示了:
available material properties or methods have changed.please confirm the property values before continuing.
Material air:
New property "Standard State Enthalpy" has been added.
Selecting constant method for "Standard State Enthalpy" -- data required.
New property "Reference Temperature" has been added.
Selecting constant method for "Reference Temperature" -- data required.
Warning: Only one compressible phase is allowed.
Please use the Phases panel to select an appropriate material for each
phase.
上回看了知道混合模型只能用一种可压缩流体,可是我只选个理想气体啊,想不通为什么?要怎么设置呢?
available material properties or methods have changed.please confirm the property values before continuing.
Material air:
New property "Standard State Enthalpy" has been added.
Selecting constant method for "Standard State Enthalpy" -- data required.
New property "Reference Temperature" has been added.
Selecting constant method for "Reference Temperature" -- data required.
Warning: Only one compressible phase is allowed.
Please use the Phases panel to select an appropriate material for each
phase.
上回看了知道混合模型只能用一种可压缩流体,可是我只选个理想气体啊,想不通为什么?要怎么设置呢?
temperature limited to 5.000000e+003 in 129841 cells on zone 2 in domain 1
absolute pressure limited to 1.000000e+000 in 32 cells on zone 2
turbulent viscosity limited to viscosity ratio of 1.000000e+005 in 168383 cells
出现这个情况一般怎么做?