UC知道用3DMAX时蓝屏打开还慢
来源：百度知道 编辑：UC知道 时间：2024/06/24 00:21:59
有时正做图时，忽然就停住了，电脑发出“D'的一块，然后就蓝屏：
A Problem has been detected and wikdows has heen shut down to prevent damage to your computer.
The prlblem seems to be caused by the folling file:nv4-disp
If this is the first time you're seen this stop error screen,restart your computer .If this screen appears again,follow these steps;
The device driver got stuck in an infinite loop.Thisusually indicates problem with the derice itself or with the device driver programming the hardware in correctly.
please check with your hardware device vendor for any driver updates. technical information:
Stop:0*000000EA(0*89935898. 0*84576100 OXF78BECBC.0*00000001)nvt-disp
这是蓝屏时出的，
以下还有机器启动后一定会出一个：尝试运行：“C：\windows\system32\nvcpl.dll,nvstartup"时发生意外，之后点确定就没事了，
补充一下电脑配置还有价格大家帮忙看看 我装电脑时告诉卖家要做3D图用的，要求配置高一些，他们说行，现在总蓝屏，我也找不出原因，大家看看是不是配置问题了，
显示卡：七彩虹9500 512
主机板：翔升8100
显示器：HRC 22寸
CPU： 5200+
A Problem has been detected and wikdows has heen shut down to prevent damage to your computer.
The prlblem seems to be caused by the folling file:nv4-disp
If this is the first time you're seen this stop error screen,restart your computer .If this screen appears again,follow these steps;
The device driver got stuck in an infinite loop.Thisusually indicates problem with the derice itself or with the device driver programming the hardware in correctly.
please check with your hardware device vendor for any driver updates. technical information:
Stop:0*000000EA(0*89935898. 0*84576100 OXF78BECBC.0*00000001)nvt-disp
这是蓝屏时出的，
以下还有机器启动后一定会出一个：尝试运行：“C：\windows\system32\nvcpl.dll,nvstartup"时发生意外，之后点确定就没事了，
补充一下电脑配置还有价格大家帮忙看看 我装电脑时告诉卖家要做3D图用的，要求配置高一些，他们说行，现在总蓝屏，我也找不出原因，大家看看是不是配置问题了，
显示卡：七彩虹9500 512
主机板：翔升8100
显示器：HRC 22寸
CPU： 5200+
不知道这蓝屏后出现的英文你是怎么粘贴过来的，不会是自己打的吧！=。=
看错误代码啊，OXF78BECBC，百度下就知道什么问题了。
你的显卡有问题，知道牌子和型号的话就去官网下个驱动，不要用盘装了，不行的话，只能换高级些的显卡了
0x000000EA:THREAD_STUCK_IN_DEVICE_DRIVER◆错误分析:通常是由显卡或显卡驱动程序引发的.◇解决方案:先升级最新的显卡驱动, 如果不行, 则需要更换显卡测试故障是否依然发生.如果出现nv4-disp，那么一定是显卡问题，建议卸载重装nv4-disp是NVIDIA显卡系统文件