UC知道电脑在运行时突然出现蓝屏(具体内容见补充),怎么解决?
来源：百度知道 编辑：UC知道 时间：2024/05/23 22:54:04
最近已经出现了第四次了,前面三次出现都是因为木马,这次出现后我杀木马一个木马也没有,杀毒软件都是最新的,刚杀过毒(病毒为0),还有昨晚一开机出现"NTLDR is missing,please press any key to continue",但是今天一早开机就正常了,就这个蓝屏的东西了:
A problem has been detected and windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file:FAD.sys
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error,restart your computer.If this screen appears again,follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacture for any windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing.If you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options,and then select safe mode.
下面还有 我
A problem has been detected and windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file:FAD.sys
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error,restart your computer.If this screen appears again,follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacture for any windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing.If you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options,and then select safe mode.
下面还有 我
NTLDR is missing.Press问题解决
在启动硬件检测一完后提示这样的错误
硬件检测一过 就报 这个错
NTLDR is missing
press Ctrl+Alt+Del to restart
NTLDR is missing.Press问题解决
我查了查有的说换了线就可以了..
NTLDR记得是装载boot.ini的系统的引导文件..
如果你确定硬件和连接没问题..
重装或者修复再或者:
通过故障恢复控制台,(假定G盘是光驱盘符..)
输入 copy G:\i386\ntldr c:\(回车),
然后再 copy G:\i386\ntdetect.com c:\(回车),
,这时,系统要提示个什么,,输入y..然后再按回车..(问题到此应该算解决了,,下一步是确定一下,问题解决没有.)
再输入c:\Boot.ini,,如果可以正常显示Boot.ini中的信息,,则重启,,则说明问题算是解决了
这个方法 也不错测试过能恢复