UC知道我的电脑是不是升级BIOS失败了,该怎么办?
来源：百度知道 编辑：UC知道 时间：2024/05/12 15:55:45
我是电脑是IBM的X30,带无线的.今天还原到WIN2000,就用IBM专用的驱动程序下载软件
下载所有驱动,后来安装里就提示升级BIOS,我也没太在意,就一路点下去,也
还顺利,只是重启之后进系统显示滚动条的到四分之三的时候就会出现蓝屏,
全部的文字如下:
*** STOP:0x0000001E (0xC0000005,0x80838B71,0x00000000,0x00000018)
KMODE_EXCEPTION_NOT_HANDLED
*** Address 80838B71 base at 808000000,DateStamp 3ee6c002 -
ntoskrnl.exe
If this is the first time you`ve seen this Stop error
screen,restartyour computer. If this screen appears again, follow
these steps:
Check to be sure you have adequate disk space. If a driver is
identified in the STOP message,disable the driver or check with the
manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS
memory options such as caching or shadowing. If you need to use
Safe Mode to remove or disable components, restart your
computer
下载所有驱动,后来安装里就提示升级BIOS,我也没太在意,就一路点下去,也
还顺利,只是重启之后进系统显示滚动条的到四分之三的时候就会出现蓝屏,
全部的文字如下:
*** STOP:0x0000001E (0xC0000005,0x80838B71,0x00000000,0x00000018)
KMODE_EXCEPTION_NOT_HANDLED
*** Address 80838B71 base at 808000000,DateStamp 3ee6c002 -
ntoskrnl.exe
If this is the first time you`ve seen this Stop error
screen,restartyour computer. If this screen appears again, follow
these steps:
Check to be sure you have adequate disk space. If a driver is
identified in the STOP message,disable the driver or check with the
manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS
memory options such as caching or shadowing. If you need to use
Safe Mode to remove or disable components, restart your
computer
BIOS升级失败的话，你是没有眼福看滚动条的。
本本最烦人的就是驱动了
你既然都下好所有驱动了还怕什么
重装系统，想装什么装什么
这问题我遇到过，由与升级BIOS造成硬件驱动不兼容〔主要是显卡〕，用安全模式进入，卸载显卡、网卡驱动或重装系统试试。如果还不行只好换显卡〔现在的显卡不是坏了，只是与别的硬件驱动不兼容〕。
能进BIOS说明主板应该没问题，而且还可以进安全模式，更不可能了．
升级了BIOS一般要重装一下系统的哟.