UC知道各位继续帮忙啊！帮我翻译一下或解决一下！小弟我万分感谢！
来源：百度知道 编辑：UC知道 时间：2024/05/13 18:01:27
各位继续帮忙啊！帮我翻译一下或解决一下！小弟我万分感谢！
Q. What do I do if the "DirectX Error DirectX has encountered an unrecoverable error. Please check DirectX Help document for possible details." error appears when I attempt to run Call of Duty 2?
A. Make sure you have DirectX 9.0c installed and properly functioning on your machine.
A. Please make sure that hardware acceleration is set to Full in your display properties as follows:
1. Right click the desktop
2. Select Properties
3. Click the settings tab
4. Click Advanced
5. Click the Troubleshooting tab
6. Verify that the Hardware Acceleration slider is set to Full.
A. Make sure that all DirectX features under the Display Tab in the DirectX Diagnostic Tool are set to Enabled as follows:
1. Click START
2. Click RUN
3. Type "dxdiag" and click OK
4. Click the Display tab of the DirectX Diagnostic tool.
5. Verify that all DirectX fea
Q. What do I do if the "DirectX Error DirectX has encountered an unrecoverable error. Please check DirectX Help document for possible details." error appears when I attempt to run Call of Duty 2?
A. Make sure you have DirectX 9.0c installed and properly functioning on your machine.
A. Please make sure that hardware acceleration is set to Full in your display properties as follows:
1. Right click the desktop
2. Select Properties
3. Click the settings tab
4. Click Advanced
5. Click the Troubleshooting tab
6. Verify that the Hardware Acceleration slider is set to Full.
A. Make sure that all DirectX features under the Display Tab in the DirectX Diagnostic Tool are set to Enabled as follows:
1. Click START
2. Click RUN
3. Type "dxdiag" and click OK
4. Click the Display tab of the DirectX Diagnostic tool.
5. Verify that all DirectX fea
我该怎么做``如果“DirectX错误 “DirectX遇到了一个不可恢复的错误。 请检查DirectX帮助文件可能的细节。 我试图运行使命召唤2 出现错误
A. 保证您有DirectX 9。0C安装和适当地起作用在您的机器的。
A. 请切记硬件加速度被设置对充分在您的显示Properties如下：
1. 用鼠标右键单击桌面
2. 选择Properties
3. 点击设置制表符
4. 点击Advanced
5. 点击查明故障制表符
6. 核实硬件加速度滑子被设置为FULL。
A. 切记所有DirectX特点在显示制表符之下在DirectX诊断器械被设置对使能如下：
1. 点击开始
2. 点击运行
3. 键入“dxdiag”并且点击OK
4. 点击DirectX诊断器械的显示制表符。
5. 核实所有DirectX特点被设置对“Enabled”。
A. 保证您有从您的显示卡的制造商安装的最新的驱动。
在开始菜单选择运行 Dxdiag 看看下面几个效果里面有没有灰``有的话``测试一遍打开```不行就重装DX`````
先确认下你现在安装的是不是DirectX 9.0c
在开始菜单选择运行 Dxdiag 查看你的DX版本！