UC知道是内存问题吗？？急~~
来源：百度知道 编辑：UC知道 时间：2024/05/29 14:41:21
我的电脑经常会在打开程序时就出现
Check to be sure you have adepuate disk space.If a driver is identified in the stop message.disable the driver or check with the manufacturer for driver updates.Tty changing rideo adapters.
check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shabowing.If you need to use safe mode to remove or disable. components
.restart your computer.press F8 to selet Advanced startup options.and then selet safe Mode.
Techincal information :
*** STOP :0x0000008E COXC0000092 OXFRAEAA56 OXF88BEELC OX00000000
*** nvmcp,sys-Adaress FTAEAA56 base at FTA6B000,Datestamp 41f7f401
之后我只能重启!!但是我并不知道问题出在哪??高手们帮帮我!!谢谢!!
Check to be sure you have adepuate disk space.If a driver is identified in the stop message.disable the driver or check with the manufacturer for driver updates.Tty changing rideo adapters.
check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shabowing.If you need to use safe mode to remove or disable. components
.restart your computer.press F8 to selet Advanced startup options.and then selet safe Mode.
Techincal information :
*** STOP :0x0000008E COXC0000092 OXFRAEAA56 OXF88BEELC OX00000000
*** nvmcp,sys-Adaress FTAEAA56 base at FTA6B000,Datestamp 41f7f401
之后我只能重启!!但是我并不知道问题出在哪??高手们帮帮我!!谢谢!!
0x0000008E:KERNEL_MODE_EXCEPTION_NOT_HANDLED
◆错误分析:内核级应用程序产生了错误, 但Windows错误处理器没有捕获. 通常是硬件兼容性错误.
◇解决方案:升级驱动程序或升级BIOS.
先软后硬，重装或者更新驱动
不行再入手硬件检查。 采用 内存、主板、硬盘的次序逐一排查，可采用替换法。内存有两根的话，可以只用一根试一试。
如果没有条件排查硬件故障，最好把你具体的硬件配置说一下
好像在内存的问题
恩。也就是说打开程序就蓝屏吧。建议你重装系统。