UC知道电脑经常出现蓝屏
来源：百度知道 编辑：UC知道 时间：2024/05/09 02:27:38
而且出现以下内容
A problem has been detected and windows have been shut down to prevent damage to your computer.
If this is the first time you have seen this stop error screen, restart your computer .If this screen appears again, follow these steps.
Check to be sure you have adequate disk space. .If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates .Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode.
Technical Information:
*** stop:0×0000008E (0×C0000005 , 0×F86A6B55, 0×A9D72684 , 0×00000000)
*** cdnhooh, sys – Address F86A6B55 base at F86A3000, datestamp 40ce4alb
Beginning dump of physical memory.
Physical memory dump complete.
Contact your
A problem has been detected and windows have been shut down to prevent damage to your computer.
If this is the first time you have seen this stop error screen, restart your computer .If this screen appears again, follow these steps.
Check to be sure you have adequate disk space. .If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates .Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode.
Technical Information:
*** stop:0×0000008E (0×C0000005 , 0×F86A6B55, 0×A9D72684 , 0×00000000)
*** cdnhooh, sys – Address F86A6B55 base at F86A3000, datestamp 40ce4alb
Beginning dump of physical memory.
Physical memory dump complete.
Contact your
蓝屏问题 无非是软硬件冲突导致 或硬件坏损23、0x0000008E:KERNEL_MODE_EXCEPTION_NOT_HANDLED
◆错误分析:内核级应用程序产生了错误, 但Windows错误处理器没有捕获. 通常是硬件兼容性错误.
◇解决方案:升级驱动程序或升级BIOS
软硬件冲突导致
把盘格式化之后重装系统，就可以了。