UC知道电脑开久了老是出现蓝屏是怎么回事？
来源：百度知道 编辑：UC知道 时间：2024/05/16 08:50:21
电脑开久了老是出现蓝屏是怎么回事？
开2个石器看电影，玩5.6个小时就蓝屏了
这是怎么回事
有时候蓝屏重起完有时候回说系统文件丢失
A problem has been detected and windws has been shut down to prevent damage to your comper
发现一个问题一直吹一直关闭,以避免破坏你comper
If this the first time you have seen this stop error screen,restart your comput,If this screen appears again follw these steps:
check to be sure you have adeqate disk space,if a driver is identifed in the stop message,disable the driver or check with the manufacturer for driver
如果你第一次看到这个停止错误屏幕,重新01-你,如果这个屏幕再出现追踪这些步骤: 你们一定要核对adeqate磁盘空间,如果司机在停氯酸信息失灵,司机驾驶或查核与厂商8
up dates Try changing video adapters check with your hardware vendorfor any BIOS updates Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable components,restart your conputer,press F8 to select Advanced startup option and then select safe mode
Technical information;
技术资料;
*** stop : 0x0000008 (0x0000005,0x8086d6f3,0xEc82aa40,0x000000
开2个石器看电影，玩5.6个小时就蓝屏了
这是怎么回事
有时候蓝屏重起完有时候回说系统文件丢失
A problem has been detected and windws has been shut down to prevent damage to your comper
发现一个问题一直吹一直关闭,以避免破坏你comper
If this the first time you have seen this stop error screen,restart your comput,If this screen appears again follw these steps:
check to be sure you have adeqate disk space,if a driver is identifed in the stop message,disable the driver or check with the manufacturer for driver
如果你第一次看到这个停止错误屏幕,重新01-你,如果这个屏幕再出现追踪这些步骤: 你们一定要核对adeqate磁盘空间,如果司机在停氯酸信息失灵,司机驾驶或查核与厂商8
up dates Try changing video adapters check with your hardware vendorfor any BIOS updates Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable components,restart your conputer,press F8 to select Advanced startup option and then select safe mode
Technical information;
技术资料;
*** stop : 0x0000008 (0x0000005,0x8086d6f3,0xEc82aa40,0x000000
蓝的时候是有什么代码？？
查查就知道了
我觉得可能是内存不稳定
0x00000080:NMI_HARDWARE_FAILURE
◆错误分析:通常是有硬件引起的.(似乎蓝屏与硬件错误有不解之缘)
◇解决方案:如果最近安装了新硬件, 请将其移除, 然后试试更换插槽和安装最新的驱动程序, 如果升级了驱动程序, 请恢复后原来的版本; 检查内存金手指是否有污染和损坏; 扫描病毒; 运行"chkdsk /r"检查并修复磁盘错误; 检查所有硬件插卡已经插牢. 如果以上尝试都无效果, 就得找专业的电脑维修公司请求帮助了.
有可能是内存、硬盘 楼上说的对 查查代码！