UC知道从装电脑时不读碟,FIRST已经设置了CDROM
来源：百度知道 编辑：UC知道 时间：2024/06/22 05:48:34
电脑出了点问题想从装,但是设置了光启后电脑还是不读盘.
是不是设置出了什么问题.下面是我电脑的设置
Cpu Feature [Press Enter]
Hard Disk Boot Priority [Press Enter]
CPU L1&L2 Cache [Enabled]
Quick Power On Self Test [Enabled]
First BOOT Device [CDROM]
Second BOOT Device [Floppy]
Third BOOT Device [Hard Disk]
Swap Floppy Drive Disabled
Boot up Number Status [ON]
Gate A20 Option [Fast]
ATA 66/100 [DE Cable Msy. [Enabled]
Tyematic Rate Setting [Disabled]
Tyematic Rate (Chars/Sec) 6
Tyematic Delay (Msec) 250
Securitic Option [Setup]
Apic Mode [Enabled]
OS Select For DRAM>64MB [Non-OS2]
HDD S.M.A.R.T Capability [Disabled]
Repot No FDD For Win 95 [YES]
Video Bios shadow [Enabled]
Small Logo(EPA) show [Disabled]
光驱和安装盘都没有问题的,请问跳线要怎么解决?
是不是设置出了什么问题.下面是我电脑的设置
Cpu Feature [Press Enter]
Hard Disk Boot Priority [Press Enter]
CPU L1&L2 Cache [Enabled]
Quick Power On Self Test [Enabled]
First BOOT Device [CDROM]
Second BOOT Device [Floppy]
Third BOOT Device [Hard Disk]
Swap Floppy Drive Disabled
Boot up Number Status [ON]
Gate A20 Option [Fast]
ATA 66/100 [DE Cable Msy. [Enabled]
Tyematic Rate Setting [Disabled]
Tyematic Rate (Chars/Sec) 6
Tyematic Delay (Msec) 250
Securitic Option [Setup]
Apic Mode [Enabled]
OS Select For DRAM>64MB [Non-OS2]
HDD S.M.A.R.T Capability [Disabled]
Repot No FDD For Win 95 [YES]
Video Bios shadow [Enabled]
Small Logo(EPA) show [Disabled]
光驱和安装盘都没有问题的,请问跳线要怎么解决?
你的光驱以前就是最先启动的吗？ 是不是要改跳线，我买个二手笔记本光驱就遇到这种问题，我的是跳线问题，记不清楚是硬盘的跳线还是光驱的跳线
介绍跳线
http://hi.baidu.com/ddbsky/blog/item/c65d71d0c181d88fa0ec9c99.html
光驱取出后会看到光驱上有跳线帽
设置光驱跳线的方法为：在光驱的后面板上有一个3×2 六个针脚的接口，在接口的上方对应每一列都有竖排的英文字母标识，如果想设置该设备为“MASTER”，也就是主，只要用镊子将跳线帽拔出来，然后插在“MA”下方两个针脚就行了。
光驱读碟问题，可以将Second BOOT Device，和THIRD BOOT DEVICE都设为DISABLE,等光驱把驱动碟读到就是了……
光驱不好吧!