UC知道刚装的系统。就蓝屏了。一大堆英文。该咋办。我抄了下来。高手进来看看吧。
来源：百度知道 编辑：UC知道 时间：2024/05/28 01:06:49
今天刚重装了系统。玩着好好的。就蓝屏了。出现下列英文/
a problem has been detected and windows has been down to prevent damage to your computer
the problem seems to be caused by the following file;ftsata2.sys
driver_unloaded_without_cancelling_pend_operations
if this is the first time you've seen this stop error screen
restart your computer. ifthis screen appears again.follow these steps.
cjecl tp ,ale sire amu mew hardware or softwars is properly installed
if this is a new installation,ask your hardware or software manufacturerfor any windows updates you might need
if problems continue, disable or remove any newly installed hardware such as coching or shadowing.
if you need to use safe mode to remove or disable components,restart your compute, press f8 to select
advanced startup options,and then select safe mode.
technical information;
xx stop;0x
a problem has been detected and windows has been down to prevent damage to your computer
the problem seems to be caused by the following file;ftsata2.sys
driver_unloaded_without_cancelling_pend_operations
if this is the first time you've seen this stop error screen
restart your computer. ifthis screen appears again.follow these steps.
cjecl tp ,ale sire amu mew hardware or softwars is properly installed
if this is a new installation,ask your hardware or software manufacturerfor any windows updates you might need
if problems continue, disable or remove any newly installed hardware such as coching or shadowing.
if you need to use safe mode to remove or disable components,restart your compute, press f8 to select
advanced startup options,and then select safe mode.
technical information;
xx stop;0x
呵呵，难为书记了，都抄下来了。
系统有问题了，那不是说了嘛，重启动，按f8进入安全模式，然后进入控制面板--系统--硬件管理器，去看看硬盘控制器的状态怎样，好像是你的硬盘驱动程序不对头。如果真是如此，用你的主板驱动盘更新一些驱动，就能解决。
虽然我不太懂，可是我觉得是硬件问题。看stop;0x000000cecoxf83806f6
0x00000008, oxf838806f6, 0x00000000 好象以前硬件出问题一样
重新安装下 操作系统
如果问题依旧
可能是硬盘坏了
欢快硬盘算了
系统问题 重新装了
系统兼容有问题，或者是软件设置不正确，重装系统吧，问题基本上是系统里的，