UC知道谁能帮帮我啊!我的电脑总是出现蓝屏白字,要怎么办啊?
来源：百度知道 编辑：UC知道 时间：2024/05/22 07:21:29
只要电脑开久了,或者是用杀毒软件扫描电脑,都会自动变成蓝屏白字,有是甚至会影响GHOST,都不能还原的!就算GHOST还原回来还是会出现蓝屏白字的现在!会不会是中了木马啊?希望哪位高手帮帮忙!
蓝屏上面的白字:(我自己已经翻译过来了,可是就是不知道要怎么做)
A problem has been detected and windows has been shut dowt to prevent damage to your computer
The problem seems to be caused by the following file:win32k.sys
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,restart your computer.
If this screen appears again,follow these step:
check to make sure any new hardware or software is properly installed.
If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software.
Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components,restart you computer,press F8 to select Advanved startup options,and then select safe mode.
Technical in
蓝屏上面的白字:(我自己已经翻译过来了,可是就是不知道要怎么做)
A problem has been detected and windows has been shut dowt to prevent damage to your computer
The problem seems to be caused by the following file:win32k.sys
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,restart your computer.
If this screen appears again,follow these step:
check to make sure any new hardware or software is properly installed.
If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software.
Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components,restart you computer,press F8 to select Advanved startup options,and then select safe mode.
Technical in
这个文件是Windows XP多用户管理的驱动文件。
如果错误信息中明确指出Win32K.sys: 很有可能是第三方远程控制软件造成的, 需要从故障恢复控制台中将对该软件的服务关闭。
建议你升级病毒库再查一下病毒，看看，如果保险点，可以找个干净的文件覆盖。
在X:\Windows\System32\Dllcache目录下有此文件的备份。只要将此备份拷到X:\Windows\System32下替代带病毒的文件即可。做一张Windows 98启动盘，并将Attrib.exe文件拷入软盘，此文件在装有Windows 98的机器上的X:\Windows\Command目录下。在BIOS的Advanced BIOS Features 中将启动顺序调整为从A盘启动，进入DOS后，进入X:\Windows\System32目录，输入Attrib -s -h -r win32k.sys，再进入X:\Windows\System32\dllcache目录下输入同样命令，再用copy win32k.sys X:\windows\System32覆盖原文件，再重新启动即可。
通常上面的X：就是C：如果你系统是安装在C盘下的话
网上找到的希望对你有帮助.
重新装你的系统吧！
也许你的内存条有问题换跟内存条
或你的操作系统有问题换一个同样的系统盘重装
哈哈```````````