UC知道IBMT30死机后拿下内存清洗，再开机就开不开了
来源：百度知道 编辑：UC知道 时间：2024/05/26 11:30:16
IBMT30死机后拿下内存清洗，再开机就开不开了，屏中间是红底白字的英文，四周是黑的，请前辈指点是什么原因，要如何处理，先行谢过了！！
我用橡皮擦了接触面，现在开机显示：cannot resume because hardware has changed .turn me off and reinstall what you removed ,orremove what you installed,while i was asleep.if you do not succeed after a couple tries,i will abandon your saved system state.after the operating system is running again,do a full shutdown and install or remove hatdware.
谢谢指教！！
我用橡皮擦了接触面，现在开机显示：cannot resume because hardware has changed .turn me off and reinstall what you removed ,orremove what you installed,while i was asleep.if you do not succeed after a couple tries,i will abandon your saved system state.after the operating system is running again,do a full shutdown and install or remove hatdware.
谢谢指教！！
基本意思是因为你的硬件已经改变，所以初始化失败，请将关机，然后重新装上你以前换掉的那个硬件，或者卸掉现在你装在机器上的那个硬件，如果说两次试验后还不能成功，那机器将放弃你 以前保存在系统里的配置信息。在操作系统运行起来后，再关机然后装入或移去硬件
从上面说的情况来看，系统认为你换了内存，是这么回事吗？，不管是不是你开机后进入BIOS加载一下系统默认值，根据我的经验应该可以解决