UC知道急急急 关于光驱固件升级的问题，请有英文基础的朋友帮忙，谢谢！！
来源：百度知道 编辑：UC知道 时间：2024/06/23 22:04:17
我的光驱是SAMSUNG SC-152A，系统是XP SP2.我想更新它的固件程序，但是看不太懂下面的文字，请有电脑基础又懂英文的告诉我应该怎么安装这个驱动，说的通俗一点，谢谢！！这是升级文件自带的说明：
How to upgrade your firmware in Dos mode ⒗
1. Donwload firmware file to the Directory(C:)
2. Reboot your pc.
3. If you press F8 in Boot, Windows95/98 Start-up menu will be appeared.
(In case of window me/2000 , They are not supported in Dos mode, please boot
using booting disket/cd)
If you see windiws95/98 start up menu, you can find "Dos prompt mode or
Command prompt only". Then please choose this mode and boot in Dos mode.
4. If the booting is finished in Dos mode, please move to the Directory(c:)that you
downloaded firmware file.
(Write C:W>CD "DIRECTORY NAME" to move to Directory in Dos mode)
5. After moving to the Directory which contain firmware file, Please write
C:W>sfdndos.exe
How to upgrade your firmware in Dos mode ⒗
1. Donwload firmware file to the Directory(C:)
2. Reboot your pc.
3. If you press F8 in Boot, Windows95/98 Start-up menu will be appeared.
(In case of window me/2000 , They are not supported in Dos mode, please boot
using booting disket/cd)
If you see windiws95/98 start up menu, you can find "Dos prompt mode or
Command prompt only". Then please choose this mode and boot in Dos mode.
4. If the booting is finished in Dos mode, please move to the Directory(c:)that you
downloaded firmware file.
(Write C:W>CD "DIRECTORY NAME" to move to Directory in Dos mode)
5. After moving to the Directory which contain firmware file, Please write
C:W>sfdndos.exe
我把大概意思说一下吧,不一句一句说了
1.下载光驱的固件文件(*.bin)和刷新程序(SFDNDOS.EXE)到硬盘.
2-3.想办法进入纯DOS系统.(你的不是WIN98系统,别指望开机按F8能进DOS),
4.在DOS下进入你存放固件文件和刷新程序的目录.
5.输入sfdndos.exe XXXXXX.bin然后回车,(XXXXXX.bin指你的固件文件的文件名)．
6．如果你只有一个光驱，这步直接按Enter就可以了。如果你有两个光驱，你想刷新的光驱是接到住IDE主接口的，就输入SFDNDOS file XXXXXX.Bin SM
如果你有两个光驱，你想刷新的光驱是接到住IDE从接口的，就输入SFDNDOS file XXXXXX.Bin SS ，没有两个光驱的话不用看这条。
如果你看到firmware upgrade is finished这样的信息，表示刷新成功，关掉你的电脑再重新开机。注意：关电脑是不要用Ctrl+Alt+Del和RESET按钮，要按那个POWER关机。
7.如果你不知道怎么进入DOS,或者对DOS命令一点都不知道，你还是别刷了。（这条是我加的）
简单点说,就是先要下载待升级的文件.
然后用启动盘启动到DOS
然后运行sfdndos.exe "升级文件的文件名"
引号不用打
最好把sfdndos.exe和待升级文件都拷在你的启动盘里,否则可能在DOS下找不到该文件
如果你只有1个光驱,这样就可以了
如果有2个,那么如果你要升级设为主设备的光驱,需要在打命令时,最后在加SM
如果是设为从盘,则跟SS
出现"firmware upgrade is finished"字样表示升级成功,请关机再开机,不要用Ctrl+Ale+Del或者按Reset重启电脑.
你真的很无聊....