UC知道安装系统过程中出现蓝屏
来源：百度知道 编辑：UC知道 时间：2024/05/15 07:54:21
在安装wiinxp的过程中，文件复制完毕，重起进入安装到还有最后一分钟的时候出现蓝屏，其屏幕提示如下：
A problem has been detected and Windwos has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode.
Technical information:
***STOP:0x0000008E(0xC0000005,0x807C660D,0xF95CF98C,0x00000000)
而且我试了好几次都是这样，同样的时间出现这样的题，请高手门帮帮门。
换了好几张安装盘试了都没有用，刚开始还以为是光驱的问题，因为那些盘在别的机器上没有问题，后来换了个光驱试了也是
A problem has been detected and Windwos has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode.
Technical information:
***STOP:0x0000008E(0xC0000005,0x807C660D,0xF95CF98C,0x00000000)
而且我试了好几次都是这样，同样的时间出现这样的题，请高手门帮帮门。
换了好几张安装盘试了都没有用，刚开始还以为是光驱的问题，因为那些盘在别的机器上没有问题，后来换了个光驱试了也是
如果是ghost安装 注意一下驱动的封装 如果封装在里面 有可能是驱动 还个原版安装就可以了
不行内存的原因比较大
换个内存试试
你的安装盘估计有问题,是不是三块钱从地滩上买的啊,去买张十块的,或者借一张别人装过的.
换张安装盘