UC知道ws-2948G-L3 问题
来源：百度知道 编辑：UC知道 时间：2024/05/07 04:23:57
ROMMON: Cold Reset frame @0x00000000
ROMMON: Reading reset reason register
ROMMON: Valid NVRAM config
System Bootstrap, Version 12.0(7)W5(15a) RELEASE SOFTWARE
Copyright (c) 2000 by cisco Systems, Inc.
ROMMON: Initializing exceptions
ROMMON: Initializing TLB
ROMMON: Initializing cache
ROMMON: Sizing and zeroing main memory ... 64 MBytes
ROMMON: Sizing non-volatile memory ... 128 KBytes
cat2948g platform with 65536 Kbytes of main memory
device does not contain a valid magic number
boot: cannot open "bootflash:"
boot: cannot determine first file name on device "bootflash:"
rommon 1 >
开机加电显示以上内容是怎么回事,怎么解决,告诉我详细啊
ROMMON: Reading reset reason register
ROMMON: Valid NVRAM config
System Bootstrap, Version 12.0(7)W5(15a) RELEASE SOFTWARE
Copyright (c) 2000 by cisco Systems, Inc.
ROMMON: Initializing exceptions
ROMMON: Initializing TLB
ROMMON: Initializing cache
ROMMON: Sizing and zeroing main memory ... 64 MBytes
ROMMON: Sizing non-volatile memory ... 128 KBytes
cat2948g platform with 65536 Kbytes of main memory
device does not contain a valid magic number
boot: cannot open "bootflash:"
boot: cannot determine first file name on device "bootflash:"
rommon 1 >
开机加电显示以上内容是怎么回事,怎么解决,告诉我详细啊
你的NVRAM里没有配置文件 所以机器无法启动
解决办法是
rommon 1 > confreg 0x2142
rommon 1 > reset
这样就可以启动了
启动之后
ROUTER#er nvram:
然后再回去
rommon 1 > confreg 0x2102
rommon 1 > reset
就OK了
再解决不了的话跟我联系 QQ:16379000