哪位高手能帮我中译英啊，很多专业名词不知道怎么翻,小弟谢过啦,急急急!!

来源：百度知道 编辑：UC知道 时间：2024/05/19 15:46:19
本设计名称为带轮注塑机，注射机型号为XS-ZT-1000, 其型腔设计为一模一腔，可用于小批量生产，整个模具高171mm，长255mm宽250mm，设计整体的基本材料使用45钢加调质，价格低，采购便捷，加工方便，型芯材料使用CrWMn，型芯精加工后表面需抛光处理，以保证制件表面质量。制件是最大直径为88mm的带轮，厚21.5mm，塑料带轮材料使用ABS，其优点是具有极好的抗冲击强度，且在低温下也不迅速下降。有良好的机械强度、硬度和一定的耐磨性、耐寒性、耐水性、化学稳定性及电气性能。由于带轮侧面带有凹槽，故将注塑机设计成斜滑块侧向抽芯的机构，由左右凹模组成，由定位销定位，结构简单，可靠易于制造。开模时利用推出机构的推力驱动斜滑块斜向运动，在塑件被推出脱模的同时由斜滑块完成侧向分型和抽芯动作。制件其表面质量并非非常严格，故对各零件的加工工艺要求不是很高。本设计图纸采用3D参数式绘制，复杂表面的识别能力大大增加，减少了制造时工人读图的时间，且当制造不同尺寸制件时，修改快速，出图快，投入生产迅捷。
关键词：带轮 注塑机 斜滑块 ABS 3D 参数式

The name of the pulley design injection molding machine, injection machine model of XS-ZT - 1000, the cavity design for a model a cavity, can be used for small batch production, the entire Die high 171 mm, width of 250mm 255mm long, the overall design of the basic materials used 45 quenched and tempered steel, low prices and convenient procurement, processing convenience, Core materials used CrWMn, core surface finishing needs polishing, to ensure that the component surface quality. Products is the largest diameter of the pulley 88 mm, 21.5 mm thick, plastic pulley using ABS material, Its advantages are excellent impact strength, and the temperature does not drop rapidly. Good mechanical strength, hardness and wear resistance of some, cold resistance, water resistance, chemical stability and electrical performance. Due to side with a pulley groove, it would injection molding machine designed lateral oblique slider core pulling bodies from around Die composition, from the pin positio