请问谁知道LVDS的差分电压范围是多少吗?

来源:百度知道 编辑:UC知道 时间:2024/05/26 15:32:52
请问谁知道LVDS的差分电压范围是多少吗?

我测试到一台LCD整机的上屏LVDS差分信号电压为62mV(带负载的情况下)

请问会有什么不良的后果吗?为什么?

LVDS差分信号电压为:3.5mA * Load,如果是负载是100欧,那差分信号电压为350mV。

Lvds :Low-Voltage Differential Signaling 低电压差分信号.

特性:
它在提供高数据传输率的同时会有很低的功耗,另外它还有许多其他的优势:
1、低至2V的电源电压兼容性
2、低噪声
3、高噪声抑制能力
4、可靠的信号传输
5、能够集成到系统级IC内
6、使用LVDS技术的的产品数据速率可以从几百Mbps到2Gbps。
7、它是电流驱动的,通过在接收端放置一个负载而得到电压,当电流正向流动,接收端输出为1,反之为0。
8、它的摆幅为250mv-450mv。
9、此技术基于ANSI/TIA/EIA-644LVDS接口标准。

LVDS差分信号电压为:3.5mA * Load
如果是负载是100欧,那差分信号电压为350mV。

LVDS is a differential signaling system, which means that it transmits two different voltages which are compared at the receiver. LVDS uses this difference in voltage between the two wires to encode the information. The transmitter injects a small current, nominally 3.5 mA, into one wire or the other, depending on the logic level to be sent. The current passes through a resistor of about 100 to 120 Ω (matched to the characteristic impedance of the cable) at the receiving end, then returns in the opposite direction