华为AR 28-11路由器 端口映射问题

先看看配置:我要开3389端口 映射我也做了,可是还是不行,是不是地址池没做好呢! 能不通过地址池映射端口吗?还有路由开启了FTP 怎么指定映射到XX机呢
<Quidway>dis cu
#
sysname Quidway
#
FTP server enable
#
l2tp domain suffix-separator @
#
dns resolve
dns server 192.168.0.1
#
radius scheme system
#
domain system
#
local-user admin
password cipher +TJ!B71%'.aQ=^Q`MAF4<<"TX$_S#6.NM(0=0\)*5WWQ=^Q`MAF4<<"TX$_S#6.
N
service-type telnet terminal
level 3
service-type ftp
#
interface Aux0
async mode flow
#
interface Ethernet0/0
description --- connect DianXin ----
ip address 202.104.10.101 255.255.255.252
nat outbound 2000
nat server protocol tcp global 222.184.101.10 3389 inside 192.168.0.253 3389
#
interface Ethernet0/1
description juyuwang
ip address 192.168.0.1 255.255.255.0
#
interface Serial0/0
clock DTECLK1
link-protoc

华为AR 28-11路由器 端口映射问题 华为路由器AR 28-11用什么命令设置网关 高分悬赏 华为AR 28-11路由器配置 如何把华为ar 28-11路由器所有端口开开? 如何登录到华为ar 28-11路由器的配置页面 公司网最近老是晚上断线!用的华为AR 28-11的路由器! 有谁知道华为ar 28-09b路由器命令啊 华为ar 28-11怎么配置? 华为 Quidway AR 28-11-ac 华为路由器AR 18-20 配置