UC知道求 翻译注塑模型文章
来源：百度知道 编辑：UC知道 时间：2024/05/22 13:59:55
smaller parts and runner have the same needs as large ones
Watch out for the transitions from runner to subgate and don’t undersize those runners.
Molder in a crystalline material, this corner piece suffered from sink and incorrect radiusing. Enlarging the sprue and runner system would improve molding issues. Increasing gate size allows barrel heats to be reduced, which means shorter cycles and more money in the molder’s pocket.
This month I found an envelope, not a big box, on the desk and the small size made me wonder what I would find inside. It turned out to be the basis for another great story.
I could tell from the part’s 45 angle that it was a small corner piece for a picture frame or window. From the sprue and short runner, I could tell it was a single-cavity mold running in a smaller-sized molding machine.
With my measuring equipment, I checked the sprue and runner. From bending the sprue, I could tell the material of choice was in the crystallin
Watch out for the transitions from runner to subgate and don’t undersize those runners.
Molder in a crystalline material, this corner piece suffered from sink and incorrect radiusing. Enlarging the sprue and runner system would improve molding issues. Increasing gate size allows barrel heats to be reduced, which means shorter cycles and more money in the molder’s pocket.
This month I found an envelope, not a big box, on the desk and the small size made me wonder what I would find inside. It turned out to be the basis for another great story.
I could tell from the part’s 45 angle that it was a small corner piece for a picture frame or window. From the sprue and short runner, I could tell it was a single-cavity mold running in a smaller-sized molding machine.
With my measuring equipment, I checked the sprue and runner. From bending the sprue, I could tell the material of choice was in the crystallin
较小的部份和转轮有与大的相同需要
留意从转轮到次闸的渐变段而且不尺寸不足那些转轮。
在一个水晶的材料,被受苦于洗槽和不正确的半径的这一个墙角块中腐朽。 扩大溶碴和转轮系统会改善线脚铸型议题。 逐渐增加的闸尺度让圆筒热被减少，这在造模者的凹虎中意谓较短的周率和较多的钱。
这月，我发现一个信封而不是一个大的盒子, 在书桌上和使我想知道我会找进的缩小型。 它变成另外的一个棒的层基点。
我可以从部份的 45 角钢它是一个画架或窗的小墙角块告诉。 从溶碴和矮转轮，我可以告诉它在一个缩小型线脚铸型机器中是单一空穴线脚赛跑。
藉由我的测定设备，我检查溶碴和转轮。 从弯曲溶碴, 我可以告诉选择的材料在结晶家庭中，因为弯曲相当容易---或许聚丙烯或一个高密度聚乙烯。 因为两者的材料有关相同的尺寸矫正需要，所以当它到达尺寸矫正溶碴、转轮和闸的时候，它不真的有关系。 我无法在盒子中找一个笔记，如此这会必须做。
溶碴、转轮和闸在小的边沿, 是好上大部分来说水晶的材料, 但是某事对我正确地没有看。 溶碴测量 . 寸在 O 直径和 . 短主要的转轮被附上的寸。 与部份的厚区间按规定尺寸制作在 . 寸, 这一个溶碴或许正在冻结离开。 这可以使包装出部份的厚区间充足除去任何的空虚是困难的。
主要的转轮是一个梯形的设计----正直的 . 寸深入地和 . 宽的, 哪一个相当小填充而且包装部份这一个的尺度, 但是我可以见到另外的一个问题. 转轮 -到-次闸渐变段贫穷地被设计,经过这面积阻碍物质的流度. 也，它看起来像转轮一样不从溶碴被遥远地足够延长达成完整的转轮深度流度向下的和进入次闸之内。