UC知道这个东西的长宽高是多少？谢谢帮忙看一下
来源：百度知道 编辑：UC知道 时间：2024/06/16 11:20:01
Width of the inertia block or pad (W)
The inertia block or pad width is to be at least one foot (30.5 cm) wider than the
base of the engine or the common skid to be installed.
Length of the inertia block or pad (L)
The inertia block or pad length is to be at least one foot (30.5 cm) longer than the
combined length of the base of the engine and driven equipment to be installed.
Height of the inertia block or pad (H)
With the length and width of the inertia block controlled by the package dimensions,
the height will be controlled by the desired weight of the block. Waukesha
recommends using a foundation specialist to determine what inertia block weight
and isolation will be required to minimize vibration transmitted to the surrounding
environment. Waukesha provides engine unbalance forces and moments in the
Drive Data section of the General Tech Data Binder. This information, along with
the driven machine unbalance informat
The inertia block or pad width is to be at least one foot (30.5 cm) wider than the
base of the engine or the common skid to be installed.
Length of the inertia block or pad (L)
The inertia block or pad length is to be at least one foot (30.5 cm) longer than the
combined length of the base of the engine and driven equipment to be installed.
Height of the inertia block or pad (H)
With the length and width of the inertia block controlled by the package dimensions,
the height will be controlled by the desired weight of the block. Waukesha
recommends using a foundation specialist to determine what inertia block weight
and isolation will be required to minimize vibration transmitted to the surrounding
environment. Waukesha provides engine unbalance forces and moments in the
Drive Data section of the General Tech Data Binder. This information, along with
the driven machine unbalance informat
宽度惯性块或垫（宽）
惯性块或垫宽度是应至少有一英尺（ 30.5厘米）的更广泛的比
基地的发动机或者普通防滑将安装。
长度惯性块或垫（ 1 ）
惯性块或垫的长度要至少有一英尺（ 30.5厘米） ，时间较
总长度的基础上，引擎和驱动设备安装。
高度的惯性，阻止或垫（八）
与长度和宽度的惯性块控制软件包尺寸，
高度将控制在理想体重的块。 waukesha
建议使用专门的基础，以确定哪些惯性块重量
和隔离，将需要，以减少振动传递给周围
环境。 waukesha提供发动机不平衡力和力矩在
硬盘数据科的一般技术数据粘结剂。这方面的资料，随着
驱动机不平衡信息，会被要求妥善计算
振动传递。
在没有计算为妥善惯性块重量， waukesha建议
重量惯性块平等13亿至15倍的重量都
设备安装在惯性块或垫。
W L H分别对应 宽 长 高