UC知道关于蓝屏和重装系统的一些问题
来源：百度知道 编辑：UC知道 时间：2024/05/07 17:40:04
我先打上蓝屏信息吧，
A problem has been detected and windows has been shut down to prevent damage to your computer.
if this is the first time you've seen this stop error screen, restart your computer.If this screen appears again follow, these steps.
check to be sure you have adequate disk space.If a driver is identified in the stop message. disable the ariver or check with the manufacturer for driver updates. Try changing video adapters
check with your hardware vendor for any BIOS updates Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable components restart your computer press F8 to select Advanced startup options and then select safe mode
Techincal information
***STOP:0X0000008E(0X0000005 0XBF84CA7E 0XF755BC30 0X00000000)
***win32.sys Address BF84CA7E base at BF800000 Datestamp 461b68f2
Beginning dump of physical memory Physical memory dump complete
contact you system administrator or
A problem has been detected and windows has been shut down to prevent damage to your computer.
if this is the first time you've seen this stop error screen, restart your computer.If this screen appears again follow, these steps.
check to be sure you have adequate disk space.If a driver is identified in the stop message. disable the ariver or check with the manufacturer for driver updates. Try changing video adapters
check with your hardware vendor for any BIOS updates Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable components restart your computer press F8 to select Advanced startup options and then select safe mode
Techincal information
***STOP:0X0000008E(0X0000005 0XBF84CA7E 0XF755BC30 0X00000000)
***win32.sys Address BF84CA7E base at BF800000 Datestamp 461b68f2
Beginning dump of physical memory Physical memory dump complete
contact you system administrator or
中毒了，我遇到过，是重装系统解决了。
进BIOS,选择恢复默认设置,再开机,如果那张盘能自启动的话,注意看屏幕提示,有些是要从光驱启动请按任意键,有些是要从光驱启动不要按键的,不行再短消息M我,我想想还有什么办法
系统崩溃了。
估计还是你没正确设置光驱启动。放入安装盘后，重启，开机的时候屏幕有提示，有的提示是按任意键，有的是按空格键，有的是按回车键，你最好参看一下说明书，有具体的指示。
系统还是能装进去的。