UC知道思科2950交换机,
来源：百度知道 编辑：UC知道 时间：2024/05/10 06:22:40
我在特权模式下用erase startup-config命令,然后重新启动交换机,出现SWITCH:输入reset命令后交换机不能正常启动,应该怎样处理
Base ethernet MAC Address: 00:0d:28:c3:43:80
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 0 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1024
flashfs[0]: Bytes available: 7740416
flashfs[0]: flashfs fsck took 4 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch:
datacenter2 你能把步骤说的精确一点吗,十分感谢了.在线等待.
Base ethernet MAC Address: 00:0d:28:c3:43:80
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 0 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1024
flashfs[0]: Bytes available: 7740416
flashfs[0]: flashfs fsck took 4 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch:
datacenter2 你能把步骤说的精确一点吗,十分感谢了.在线等待.
reload试试
你需要手动输入一个可启动的IOS文件的路径地址,不然系统无从启动了.
听说思科2950交换机硬件也有可能出现故障
你还是找售后吧..
可能是你在使用erase startup-config后，它出现提示你没有看到，结果把它的IOS删掉了，如果是这样，建议你重新上传一下它的IOS