UC知道跪求英语翻译5.1：A study on polishing of molds using hydrophilic fixed abrasive pad
来源：百度知道 编辑：UC知道 时间：2024/05/16 12:20:54
5.1. Experimental setup
We applied the fabricated hydrophilic FAP to a die steel. Fig. 6 shows the polishing machine used for the experiment. Table 2 shows the conditions of the experiment. The polishing pad was developed from FAP, and a polishing tool head that is easily attached to the spindle of machining center was specially developed. It is composed of a universal joint, ball spindle shaft, and elastic backing material. FAP with grain sizes of #100, #600 and #1000 were investigated for coarse, medium, and fine polishing. Each polishing was performed by a six-time travel on the same area. The surface roughness was measured with a stylus (Taylor-Hobson) and the surface topography was observed by optical micro-scope. The polishing characteristics of thermo-curable FAP (3M Co., #100, #400, #800, #1800), which has been broadly used, and the hydrophilic FAP were comparatively studied. Pad surfaces were observed using SEM photos, and had self-conditioning effects of the hydrophi
We applied the fabricated hydrophilic FAP to a die steel. Fig. 6 shows the polishing machine used for the experiment. Table 2 shows the conditions of the experiment. The polishing pad was developed from FAP, and a polishing tool head that is easily attached to the spindle of machining center was specially developed. It is composed of a universal joint, ball spindle shaft, and elastic backing material. FAP with grain sizes of #100, #600 and #1000 were investigated for coarse, medium, and fine polishing. Each polishing was performed by a six-time travel on the same area. The surface roughness was measured with a stylus (Taylor-Hobson) and the surface topography was observed by optical micro-scope. The polishing characteristics of thermo-curable FAP (3M Co., #100, #400, #800, #1800), which has been broadly used, and the hydrophilic FAP were comparatively studied. Pad surfaces were observed using SEM photos, and had self-conditioning effects of the hydrophi
5.1 。实验装置
我们运用编造亲水FAP的一个模具钢。图。 6显示抛光机用于实验。表2列出的条件进行实验。抛光垫发达，从地图和抛光工具头是很容易附着在主轴加工中心是专门开发的。它是由一个万向节，球主轴轴，弹性支撑材料。 FAP的与晶粒尺寸的编号100 ，编号600和＃ 1000人进行调查，为粗，中，细抛光。每个抛光是由六年时间旅行就同一地区。表面粗糙度测量与触控笔（泰勒hobson ）和表面形貌观察光学微范围。抛光特色的热固化地图（ 3 M公司，编号100 ，编号400 ，编号800 ，编号1800 ） ，已被广泛运用，而亲水地图进行了比较研究。垫面观察用扫描电子显微镜照片，并自我调节的影响，亲水FAP的。
fig.6.automatic模具抛光机（ 5轴） 。表2实验条件。