装系统时出现“Error loading operating system",重启后无法再装系统

重动时错误加载!!!

参考资料::::::
maxtor官方：Suggestions to Resolve the Condition:
1)Apply power to the computer. 开机（不插硬盘）。
2)Access the system BIOS. Set the drive type as None or Not Installed. Load BIOS Defaults .Load SETUP Defaults .在BIOS里，把硬盘设为NONE。
3)Save the BIOS changes and reboot the PC to a System Boot Diskette. 用启动盘重启机。
4)Shut down the PC after the memory count is displayed. 检测完内存后关机。
5)Reconnect the power and interface cables to the hard drive. 重新插上硬盘电源和数据线。
6)Access the System BIOS. 进入BIOS。
7)Auto-Detect the hard drive. Ensure that the LBA Mode option is enabled. 设为自动检测硬盘。确认LBA模式无误。
8)Save the BIOS changes and boot the PC with a System Diskette. 软盘启动。
9)Partition and format the hard drive via the operating system. 分区格式化。
10)Reboot the system. On bootup, the screen should read: 重启机，显示如下：
Verifying DMI Pool Data Update Successful
11)The system should continue booting normally. 正常。

Other