UC知道三星YP-U2升级recovery mode怎么弄
来源：百度知道 编辑：UC知道 时间：2024/05/17 04:36:28
<Upgrading the firmware >
1. Connect device to the PC. If USB device is connected, disconnect the "removable disk" safely.
2. While pressing the "Play" button, execute "Reset" button on the front(under the cover) of device.You have to press the "Play" button continuously.
3. Execute the "device Updater" for upgrading the firmware. You have to press the "Play"button continuously.(Normally it takes 10 seconds.)
In case of searching device driver, you have to click “Next” to go on.(Important!!). It needs more time.
这段字是说明上的看不懂~~~~~哪个高手翻译下噢
1. Connect device to the PC. If USB device is connected, disconnect the "removable disk" safely.
2. While pressing the "Play" button, execute "Reset" button on the front(under the cover) of device.You have to press the "Play" button continuously.
3. Execute the "device Updater" for upgrading the firmware. You have to press the "Play"button continuously.(Normally it takes 10 seconds.)
In case of searching device driver, you have to click “Next” to go on.(Important!!). It needs more time.
这段字是说明上的看不懂~~~~~哪个高手翻译下噢
1 。连接设备到PC系统。如果USB设备连接，断开"可移动磁盘" ，安全地进行。
2 。同时按下"玩"的按钮，执行"重置"按钮，就阵线（掩护下） device.you要按下"玩"的按钮不断。
3 。执行"设备更新"的升级韧体。你必须按下"播放"按钮继续。 （通常需时10秒） 。
在案件的搜索设备驱动程序，你必须按" Next "继续下去。 （重要！ ） 。它需要更多的时间。