急:帮我翻译一下行吗

来源:百度知道 编辑:UC知道 时间:2024/05/21 03:38:31
A constant current transformer developing 15,000 Volts open circuit produces an electrical arc between two long electrodes. The current is about 0.03 Amperes. The separation of the electrodes increases from 7mm at the bottom to 26mm at the top. Air heated by the arc moves upward because it is less dense than the cooler air around it, and it moves at a speed for which the buoyant force and the drag force are equal. Because the current is alternating, there are really a succession of arcs one 120th of a second apart, with each electrode alternately plus and minus.
Instructions:
Press the black button on the lower left. If you wave your fingers while standing back, you can strobe it, like a TV screen.

恒定电流互感器开发15000伏特开路,产生电弧间长电极。目前大约是0.03安培。分家电极增幅从7毫米在底层,以26毫米在顶部。空气加热,电弧向上的动作,因为它是密度较低,较凉的空气靠近它,它的速度移动,其中有浮力和阻力都是平等的。因为现行的是交流电,真的有一连串的弧线一个120的第二次外,在每个电极交替正负。
说明:
按下黑色按钮就左下。如果你浪你的手指,而常委会回来,你可以频闪它,就像一个电视萤幕。

开路产生15,000伏电压的恒流变压器可在两个长电极之间产生电弧。电流约为0.03安培。电极之间的距离从底部的7mm增加到顶部的26mm。经电弧加热的空气上升,因为热空气比周围的冷空气稀薄,其上升速度为浮力和拉力相等时达到的速度。由于是交流电流,因此每隔120分之一秒就有一个电弧产生,每个电极交替为正极和负极。
说明:
按下左下方的黑色按钮。如果你退后并挥动手指,你就能选通它,就象电视屏幕一样。