求助将以下摘要翻译成英文~很急~谢绝机译

来源：百度知道 编辑：UC知道 时间：2024/05/09 19:59:31
串口通信是计算机上一种非常通用的数据传输方式，而在有些数据传输的时候需要将大量的串行通讯数据转换为并行或其他接口输出，有时会多达10个端口以上。若仅仅采用类似于8251的芯片来设计，那么电路板将会非常庞大，因此采用FPGA芯片实现是一个较好的出路。
设计以XILINX公司所出产的Spartan2系列的XC2S50 FPGA芯片为主芯片。串口模块由外围RS232模块与FPGA芯片内UART模块构成，数据通过RS232模块的读写口与UART模块连接，串口设计为16路。另外，FPGA芯片与DSP芯片间设计两路并行接口连接并实现数据双向导通，DSP芯片选用TMS320VC5402芯片。在FPGA芯片内，选择用VHDL语言编程来实现软件方面的程序设计。其中，所设计的串口要求达到16C550的设计标准。
多串口转发器通常用于数据采集和转发方面。基于大规模可编程器件--FPGA芯片的设计比在单片机或其它芯片上的设计要便利许多。设计实用性强，适用于拥有多串口通讯的场合。

ps：专业词汇无法一一给出~请见谅~希望有能者在明夜前给答复~
我说过了~谢绝机译~如果只有机译本事的话~请滚蛋

Serial Communication is a very common computer data transmission, data transmission and in some time will need a large number of serial communication data into a parallel or other interface output, sometimes as many as 10 ports above. If only similar to those used to design chips in 8251, then the board will be very large, so a FPGA chip is a better way out.
XILINX company to design the Spartan2 series produced by the XC2S50 FPGA chip-based chips. Serial RS232 module by module and the external FPGA chip UART module consists of data through the RS232 module to read and write and I UART modules, serial designed to be 16. In addition, FPGA DSP chips and chip design two-way parallel interface connector and to achieve double-data-wizard, DSP chips selected TMS320VC5402 chip. FPGA chip in, choose to use VHDL language programming to achieve the software design process. Of these, designed by the serial request to 16 C550 design standards.
And more generally for serial transponde